Track Programmed Playback - Sharp DV-L80 Operation Manual

INPUT
– VOLUME
OPERATE /DVD
TITLE FUNCTION
MENU ENTER
SETUP VIDEO ADJ.
ZOOM PROGRAM DISPLAY VIEW MODE
LCD ON/OFF
DVD VIDEO PLAYER
VIDEO VIDEO
C D
C D
C D C D

Track programmed playback

This function can be used only with a disc that has been played once,
even partially.
1
Turn on the Player, start play of the disc, and then stop play. Next, press
PROGRAM.
• The track programming screen is
displayed.
2
Use ' and " to cycle through numbers at
the currently selected (highlighted)
position, and then press | to move the
highlighting to the right.
For example, to play the 12th track first:
• Use ' and " to cycle through
numbers at the second digit until "1" is
displayed, and then press | to move
the highlighting to the first digit. Use ' and " to display "2" for the first
digit, and then press | to move the highlighting to the next track
number. (Pressing | while "-" is displayed for a digit enters "0" for the
digit.)
• Repeat the procedure above if you want to input other track numbers.
You can input up to 20 tracks in the sequence in which you want them to
play.
+
SHIFT
RETURN
Programmed Playback
TRACK PROGRAM
=TRACK
TRACK PROGRAM
=TRACK
1
TRACK PROGRAM
=TRACK
12
GB