Sharp DV-L80 Operation Manual page 28

• This Player cannot be connected to an amplifier or processor that does not have
5.1ch input jacks.
• With an analogue connection, audio cannot be produced from a DVD recorded
with DTS, so you should use an optical digital connection to play such discs.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
I Digital Connection
• Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround
processor or a Dolby Digital/DTS/MPEG Audio digital surround decoder to
your Player's optical digital jack provides richer, more powerful audio play.
• To use DTS digital surround, use the Disc Menu screen (page 96) or the
Function control screen (page 74) to select DTS audio.
DIGITAL OUT (OPTICAL)
VIDEO AUDIO(L/R) AUDIO OUT
IN/OUT
DIGITAL OUT(OPTICAL) SURROUND
Optical digital cable
(commercially available)
Dolby Digital (5.1ch)/
DTS/MPEG Audio
processor or amplifier
After making the above connection
1
Set the "SPEAKER" in "SPEAKER SETUP" to "2ch" (see page 56).
2
Set the " DIGITAL" in "AUDIO SETUP" to "BITSTREAM" (see page 49).
• You need to purchase a commercially available optical digital cable to make the
connection described above.
• To play a disc recorded with DTS, you need to use DTS processor or amplifier.
• This connection is not possible if the processor or amplifier to which you want to
connect does not have an optical digital input jack.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
PHONES
C/SW
Connecting to Audio Equipment
DIGITAL IN
COAXIAL OPTICAL
To optical
digital
input jack
GB