Makita XRH05Z Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. XRH05Z
  6. Manual

Makita XRH05Z Manual

Cordless combination hammer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL
Cordless Combination Hammer
XRH05
IMPORTANT: Read Before Using.

Advertisement

Table of Contents
loading

Related Manuals for Makita XRH05Z

Summary of Contents for Makita XRH05Z

  • Page 1 MANUAL Cordless Combination Hammer XRH05 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    (Original instructions) SPECIFICATIONS Model XRH05 Concrete 26 mm (1") Capacities Steel 13 mm (1/2") Wood 32 mm (1-1/4") No load speed (RPM) 0 - 1,250 /min Blows per minute 0 - 5,000 Overall length 350 mm (13-3/4") Net weight 4.6 kg (10.1 lbs) Rated voltage D.C.
  • Page 3 13. Remove any adjusting key or wrench before Battery tool use and care turning the power tool on. A wrench or a key 24. Recharge only with the charger specified by left attached to a rotating part of the power tool the manufacturer.
  • Page 4 ENC007-8 Check tightness of screws carefully before operation. IMPORTANT SAFETY In cold weather or when the tool has not been INSTRUCTIONS used for a long time, let the tool warm up for a while by operating it under no load. This will FOR BATTERY CARTRIDGE loosen up the lubrication.

  • Page 5: Functional Description

    Overload protection FUNCTIONAL DESCRIPTION When the tool is operated in a manner that causes it to draw an abnormally high current, the tool automatically stops without any indication. In this situation, turn the CAUTION: tool off and stop the application that caused the tool to Always be sure that the tool is switched off and the •...
  • Page 6 CAUTION: CAUTION: Before inserting the battery cartridge into the tool, Always check the direction of rotation before • • always check to see that the switch trigger operation. actuates properly and returns to the "OFF" Use the reversing switch only after the tool comes •...

  • Page 7: Torque Limiter

    CAUTION: 1. Bit shank Do not rotate the action mode changing knob • 2. Bit grease when the tool is running. The tool will be damaged. To avoid rapid wear on the mode change • mechanism, be sure that the action mode changing knob is always positively located in one of the three action mode positions.

  • Page 8: Operation

    bit to the desired angle. OPERATION Depress the lock button and rotate the action mode changing knob to the symbol. Then make sure that Hammer drilling operation the bit is securely held in place by turning it slightly. 014421 014410 Set the action mode changing knob to the symbol.

  • Page 9: Maintenance

    In fact, this excessive pressure will only serve any other maintenance or adjustment should be to damage the tip of your bit, decrease the tool performed by Makita Authorized or Factory Service performance and shorten the service life of the tool. Centers, always using Makita replacement parts.

  • Page 10: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •...
  • Page 11 To reduce your exposure to these ch emicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. View other drills and drivers made by Makita on our website.

This manual is also suitable for:

Xrh05

Table of Contents