Self-Timer Mode; Entering Settings Menu; Advanced Menu Settings - GoPro HD HERO2 User Manual

UsInG yoUr HD Hero2: caMera MoDes

sElF-timER moDE

In Self-Timer Mode, the HD HERO2 will take a single photo at the end of a
10-second countdown.
• Verify that the camera is in Self-Timer Mode, indicated by
not, press repeatedly until the camera displays the Self-Timer Mode icon.
• To take a photo, press and release
Recording Light will flash during the countdown, ending with a series of
rapid beeps and flashes just before the photo is taken.
• To stop the countdown timer, press
As in Photo Mode, the LCD screen will display your currently
selected photo resolution (11MP, 8MP or 5MP), the number of
photos stored on your SD card, and the number of photos that
can be taken before the card is full.
16
on the LCD. If
. The camera will beep and the LED
.

aDVanceD MenU settInGs

EntERing tHE sEttings mEnu
Using the Settings Menu, many of the functions of the HD HERO2 can
be customized based on your shooting needs.
to access your HD HERo2 settings:
1. Make sure your camera is powered ON.
2. Cycle through camera modes using
the SETTINGS icon.
3. To enter into the Settings Menu, press
4. Use to toggle through each camera setting mode.
5. Every settings mode has a list of options. Press
mode. The option which is currently active will be highlighted. Press
toggle through the list. Press
6. Press to cycle to the next camera setting mode or press
current option list again.
until the LCD Status Screen shows
.
to enter into a specific
to select highlighted option and exit list.
to display
to
17