GoPro CineForm Studio Firmware Upgrade Manual

Firmware Update for HD HERO2,
Wi-Fi BacPac™ and Wi-Fi Remote
BEFORE YOU GET STARTED:
• Make sure your HD HERO2, Wi-Fi BacPac™ and Wi-Fi Remote are fully charged before attempting Update process.
• Make sure your HD HERO2 has an SD card inserted (Format your SD card using your HD HERO2 camera, and take at
least one test photo or video before attempting the Update process).
• Remove any accesories (such as the LCD BacPac™ or Battery BacPac™) from your HD HERO2 camera.
• Make sure your GoPro CineForm Studio software is up-to-date.
• Make sure your computer has an active connection to the internet.
UPDATE YOUR Wi-Fi BacPac™:
1.) Back in the Device Window, the list should refresh and show an Update Available for
your Wi-Fi BacPac™.
2.) Select your Wi-Fi BacPac™ from the list and press 'UPDATE' if an update is available
(a press of the Refresh button may be required for Device Window to update and confirm
Product Registration is complete).
3.) Wait for Update process to complete. Up to date Version will be reflected when Device
Window refreshes, and your Wi-Fi Remote should now show Update Available.
UPDATE YOUR HD HERO2:
1.) Without any BacPac™ accessories connected, power ON your HD HERO2 camera and
connect it to your computer via USB.
2.) Launch GoPro CineForm Studio application, and an Update
Available notice will appear.
3.) Press the 'SHOW DETAILS' button, and this will launch the
Device Window:
4.) Select your HD HERO2 camera from the list, and press
'UPDATE'.
5.) Wait for the Update process to complete (camera may
beep and lights will flash), and when process completes you
may disconnect and power OFF your camera.
Note: Mac users may be required to follow additional steps to complete the Update process. Follow the steps
on screen.
REGISTER YOUR Wi-Fi BacPac™:
*.) Power ON your HD HERO2 camera and connect your Wi-Fi BacPac™ (with power ON) to
the back of your camera. At this point, you should also power ON your Wi-Fi Remote..
1.) With your Wi-Fi BacPac™ attached to your HD HERO2 camera, connect your Wi-Fi
BacPac™ to your computer via USB (make sure to connect thru the USB port on Wi-Fi
BacPac™, not the USB port on the HD HERO2 camera).
http://cineform.com/downloads.aspx
2.) If another Update Available notice appears, you should
press the 'SHOW DETAILS' button again to get back to the
Device Window.
3.) Select your Wi-Fi BacPac™ from the list in Device Win-
dow in GoPro CineForm Studio, and press 'REGISTER'.
4.) Fill out and submit the Product Registration web form
you are directed to.