Table of Contents
Advertisement
Keep security codes private. If the security codes are found and
improperly used by others, DOCOMO shall not be liable for any
damages incurred on the users.
If you forget your security codes, you are required to bring your
identification (a driver's license etc.), your handset and your
docomo nano UIM card to a docomo Shop.
For details, contact the number listed in "General Inquiries" on
the last page.
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at a shop other than a
docomo Shop, bring your identification (a driver's license etc.)
and your docomo nano UIM card to a docomo Shop or contact
the number listed in "General Inquiries" on the last page.
Security key (security code for various functions)
■
If you set any restrictions, you need to enter the security key to
temporarily disable them. [Passcode] ([0000]) is set as a security
key by default but you can change it (nP. 65 "Changing security
key").
If you enter wrong security keys five times continuously, you
cannot enter it for 30 seconds.
■
Network security code
Network security code is a four-digit code required for confirming
the subscriber's identity when an order is received at a docomo
Shop, docomo Information Center or "お客様サポート" (Support),
used for accessing various network services, etc. You can set any
code at the time of subscription but you can change the code.
For details on network security code, refer to the DOCOMO
website.
■
PIN code
A docomo nano UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the
code (nP. 65 "Setting up SIM card lock").
The PIN code is a four- to eight-digit security code that needs to be
entered for recognizing the user of the handset every time a
docomo nano UIM card is inserted or when a device is turned on to
prevent unauthorized use of the docomo nano UIM card by a third
party. Making/Receiving a call and the device operation are
enabled by entering PIN code.
Use the previously set PIN code when inserting a docomo nano
UIM card that has been used in another device. It is [0000] if the
setting has not been changed.
If you enter wrong PIN codes three times continuously, it is
locked and the docomo nano UIM card becomes unavailable. In
this case, unlock with "PUK" (PIN Unlock Key).
PUK (PIN Unlock Key)
■
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
If you enter wrong codes 10 times continuously, the docomo
nano UIM card is completely locked. In this case, contact a
docomo Shop.
Changing security key
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Application lock]
2
Enter the passcode/[OK]
3
[Change security key]
4
Select an item
Finger
list: Set a pattern which forms by linking four or more
dots.
Passcode: Set four- to sixteen-digit number.
Password: Set four to sixteen alphanumerics or half-width
symbols including at least one alphabet.
Setting up SIM card lock
You can make settings for the PIN code.
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Set up SIM card lock]
2
Select an item
Lock SIM
card: Set whether to enter the PIN code when the
power is turned on.
Change SIM
PIN: Change the PIN code.
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked or from the PUK (PIN
Unlock Key) entry screen.
The setting is saved on the docomo nano UIM card.
Disabling PIN lock
1
In the PIN locking screen, enter PUK (PIN
Unlock Key)
2
Enter a new PIN code
3
Enter the new PIN code again
Encrypting phone
You can encrypt data on the handset.
Carry out Reset all to disable Encrypt phone
(nP. 67 "Resetting all").
Carry out the operations while charging the battery with its
battery level still left sufficiently.
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Encrypt phone]
2
[ENCRYPT PHONE]
: If Screen lock is set to an item other than [None] or [Swipe or
Touch], unlock by method set in Screen lock.
3
[ENCRYPT PHONE]
: If Screen lock is set to an item other than [None] or [Swipe or
Touch], the password entry screen for decrypting the storage
is displayed when the power is turned on. Unlock by method
set in Screen lock.
･ When you make settings for Screen lock, you can select
whether to display the password entry screen for
decrypting the storage every time the power is turned on
(nP. 63 "Lock & security").
Note that all data on the handset are deleted if Encrypt phone is
interrupted.
If you enter wrong patterns/lock numbers/passwords 10 or 20
times in a row when decrypting the storage, you cannot enter
them for 30 seconds. Note that if you enter wrong ones 30
times in a row, the handset is initialized.
65
Handset Settings
Advertisement
Table of Contents
