Operation During A Call - Sharp Docomo AQUOS Ever SH-04G Instruction Manual

Table of Contents

Advertisement

2
[|]/[Absence Memo]
Playing an answering memo
1
In the home screen, []]
2
[|]/[Call settings]
3
[Call/Ans Memo]
4
[Answering Memo List]
5
Select an answering memo

Operation during a call

You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
Voice call screen
Video call screen
1 End call
End a call.
2 Mute
Enable or disable mute setting on a current call.
3 Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch audio
output ports.
4 Dialpad
You can enter touch-tone signals.
5 Hold
Hold/Unhold a current call.
6 Switch to video
Switch to a video call.
7 The other party's image
If you cannot receive the other party's image, [K] is
displayed.
8 Your own image
9 Switch camera
Switch to the front camera/back camera.
Note the followings to use hands-free or video call.
・ Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
・ When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
・ If the sound breaks up during a hands-free call, lower the
in-call volume.
In the following cases, [(high-quality sound)] is displayed.
While receiving a voice call/During a voice call in VoLTE
While making a video call or receiving a video call/During a
video call
Adjusting the in-call volume
1
x/y during a call
Switching to full screen display
Switch the video call screen to the full screen display.
1
Touch the screen during a call
: To disable the full screen display: Touch the screen
Adding a call
Place a current voice call on hold and make a call to another party.
Subscription to Call Waiting Service is required to add a call.
1
[|] during a call/[Add call]
2
Enter a phone number/[0]
: Touch the other party put on hold to switch to whom you talk.
Switching to voice call
Switch to a voice call during a video call.
1
[|] during a call/[Switch to voice call]
Displaying dialpad
Display the dialpad during a video call.
1
[|] during a call/[Dialpad]
Switching audio output port
Set whether to talk with hands-free during a video call. When a
Bluetooth device is connected, you can switch audio output ports.
1
[|] during a call/[Switch audio output
destination]
2
Select an audio output port
Switching image of camera
Set whether to send your own image during a video call.
1
[|] during a call/[Camera OFF]/[Camera ON]
Switching image area
Switch displaying area of the other party's/your own image during a
video call.
1
[|] during a call/[Switch video area]
Voice memo
1
[|] during a call/[Sound Memo]
2
[Stop]
Displaying phonebook
1
[|] during a call/[Address Book]
Checking your own phone number
1
[|] during a call/[My profile]
35
Call

Advertisement

Table of Contents
loading

Table of Contents