Makita RP1800FXJ Instruction Manual page 14

Ball bearing roman ogee bit (Fig. 51)
D A 1 A 2
6 20 8
6 26 8
For Model RP1800
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects to
the operation of other equipment. With a mains
impedance equal or less than 0.40 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
For Model RP1800F
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects to
the operation of other equipment. With a mains
impedance equal or less than 0.39 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
For Model RP1801
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects to
the operation of other equipment. With a mains
impedance equal or less than 0.38 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
For Model RP1800, RP1800F, RP1801
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: cutting grooves in MDF
Vibration emission (a
Uncertainty (K): 1.5 m/s
14
L 1 L 2 L 3 R1
40 10 4.5 2.5
42 12 4.5 3
): 86 dB (A)
pA
): 97 dB (A)
WA
2
): 4.0 m/s
h
2
For Model RP2300FC, RP2301FC
mm Noise
The typical A-weighted noise level determined according
R2
to EN60745:
4.5
Sound pressure level (L
Sound power level (L
6
Uncertainty (K): 3 dB (A)
Vibration
ENF100-1
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: cutting grooves in MDF
Vibration emission (a
Uncertainty (K): 1.5 m/s
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Router
ENF100-1
Model No./ Type:
RP1800, RP1800F, RP1801, RP2300FC, RP2301FC
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
ENF100-1
Milton Keynes, MK15 8JD, England
ENG102-3
ENG223-2
): 87 dB (A)
pA
): 98 dB (A)
WA
Wear ear protection.
2
): 4.5 m/s
h
2
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho
Anjo, Aichi, JAPAN
ENG102-3
ENG223-2
ENH101-13