AEG 7000 ProSteam User Manual page 15

16-22 mm
Ø 35 mm
12,5 - 14 mm
595-598 mm
max. 105°
Set the position of the lower hole respecting
dimensions and distances shown in the
drawing (449 mm).
Countersink the holes.
449
mm
22±1,5 mm
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door)
on the inner side of the door.
The hinges will be fixed to the door by
means of the four supplied screws A.
A
Mounting the door
Fix the hinges to the hinge supports on the
appliance by means of the two supplied
screws B.
To align the door perfectly,
make sure that the edge of
cupboard door is parallel with
the appliance edge and to
respect the proper opening
angle (max. 105 °C).
The hinges can be adjusted to
compensate for possible
uneven thickness of the door.
ENGLISH 15