AEG 7000 ProSteam User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. 7000 ProSteam
  6. User manual

AEG 7000 ProSteam User Manual

Hide thumbs Also See for 7000 ProSteam:
Table of Contents

Advertisement

Quick Links

L7FE7461BI
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG 7000 ProSteam

Summary of Contents for AEG 7000 ProSteam

  • Page 1 L7FE7461BI User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    1369/2017........................43 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 7 kg (refer to the •...
  • Page 5 ENGLISH • The floor area on which the appliance necessary to change the mains plug is to be installed must be flat, stable, fuse, use only a 13 A ASTA (BS 1362) heat resistant and clean. fuse. • Make sure that there is air circulation •...

  • Page 6: Installation

    2.5 Service • Cut off the mains electrical cable close to the appliance and dispose of • To repair the appliance contact an Authorised Service Centre. • Remove the door catch to prevent • Use original spare parts only.
  • Page 7 ENGLISH 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING! It is strongly recommended that this action is carries out by two persons. 2. Carefully put the appliance down on its rear side. Make sure not to damage the hoses.
  • Page 8 6. Remove the three bolts, the hose holders and plastic spacers by using the spanner supplied with the appliance. 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes.
  • Page 9 ENGLISH 3.5 Positioning and levelling 1. Install the appliance on a flat hard floor. WARNING! Make sure that carpets do not stop the air circulation below the appliance. Bring the appliance near the furniture recess before levelling it. For more details, refer to paragraph "Building in".
  • Page 10 The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance.
  • Page 11 ENGLISH To a stand pipe with vent-hole Directly into a drain pipe at a height of not Ø 40 mm less than 60 cm (23.6”) and not more than 100 cm (39.3”). The end of the drain hose must always be ventilated , i.e.
  • Page 12 If hoses run behind the 596 mm 553 mm appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. 819 mm 50 mm 50 mm 140 mm 76 mm The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum.
  • Page 13 ENGLISH 1. Remove the screws of the top cover on the rear of the appliance and install the anti- tilting device as shown in the drawing. 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen ~10mm the nut counterclockwise with a 3mm wrench.
  • Page 14 Reversibility of the cupboard door Carry out the cupboard door reversibility before the appliance is built in completely. If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O.
  • Page 15 ENGLISH Set the position of the lower hole respecting 16-22 mm dimensions and distances shown in the drawing (449 mm). Countersink the holes. Ø 35 mm 12,5 - 14 mm 22±1,5 mm 595-598 mm Hinges To mount the hinges it is necessary to drill two holes (dia.

  • Page 16: Product Description

    Counter-magnet The appliance is pre set for a magnetic closure. For a correct closure: 1. Position the screw C and the counter- magnet D on the magnetic plate N. Lean the cupboard door against the screw until it leaves a mark.

  • Page 17: Control Panel

    ENGLISH 5. CONTROL PANEL 5.1 Control panel description 90° 1400 Wool/Silk Cottons 60° 1200 Denim Cottons Eco Time Save 40° Outdoor Synthetics Start/ Pause 30° Delay 20min 3kg Delicates Start 20° Duvet Anti-allergy Cold Night Sport Steam Rinse Spin/Drain The permanent options are Soft Plus touch button and set by holding pressed the permanent Extra Rinse option...

  • Page 18: Dial And Buttons

    Delay start indicator. The digital indicator can show: • Reset position ( • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. • Error indicator ( Time Manager indicator. Anti-stain indicator.
  • Page 19 ENGLISH dashes to indicate that no programme You must drain the water to unlock was selected. the door. As the programme is very quiet, it is 6.4 Temp. suitable for use at night time when cheaper electricity tariffs are available. When you select a washing programme, In some programmes the rinses are the appliance automatically proposes a...
  • Page 20 6.8 Permanent Soft Plus crease movements stop and the door unlocks. Set this option to optimise the fabric A small laundry load helps to softener distribution and improve fabric reach better results. softness. Recommended when you use fabric 6.11 Child Lock softener.

  • Page 21: Programmes

    ENGLISH suitable for a full load of normally indicator soiled garments. a quick cycle for a full load of lightly soiled garments. very quick cycle for a smaller lightly soiled load (max. half load recommended). the shortest cycle to freshen up a ■...
  • Page 22 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature load Temperature range 1400 rpm 7 kg White cotton and fast-coloured cotton. Normal soil. The energy consumption decreases and the Cottons Eco time of the washing programme is extended, en- 40 °C...
  • Page 23 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature load Temperature range 1 kg Cottons, Synthetics, Delicates. Short and gen- tle steam programme to refresh even your very Steam delicate garments, including very delicate gar- ments with sequins, lace etc.
  • Page 24 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature load Temperature range 1200 rpm 2 kg Do not use fabric softener and Outdoor make sure that there is no soften- 1 kg er residue in the detergent dis- 30 °C...
  • Page 25 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature load Temperature range 1200 rpm 1.5 kg Machine washable wool, hand washable wool (1200 - 400 and other fabrics with «hand washing» care Wool/Silk rpm) symbol...

  • Page 26: Settings

    Programme Spin ■ ■ ■ ■ ■ ■ Sport ■ ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ ■ ■ ■ ■ Denim ■ ■ ■ ■ Wool/Silk 1) Prewash and Stains cannot be selected together. 2) This option is not available with temperature lower than 40 °C.

  • Page 27: Before First Use

    ENGLISH 9. BEFORE FIRST USE 1. Make sure that the electrical power is 4. Set and start a programme for cotton available and the water tap is open. at the highest temperature without 2. Pour 2 litres of water into the any laundry in the drum.
  • Page 28 - Maximum level for quantity of liq- uid additives. - Flap for powder or liquid deter- gent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not With the flap in the position DOWN: exceed the maximum •...
  • Page 29 ENGLISH Changing the delay start after display and the given information changes accordingly. the countdown has started If a selection is not possible To change the delay start: an acoustic signal sounds and the display shows 1. Touch the Start/Pause button to pause the appliance.
  • Page 30 2. Press the button On/Off again to The door unlocks and the indicator activate the appliance. goes off. If the ProSense System has 1. Press button On/Off to deactivate completed and the water the appliance. filling has already started,...

  • Page 31: Hints And Tips

    ENGLISH 3. When the programme is completed Press the On/Off button to activate the appliance again. and the door locked indicator The display shows the end of the last goes off, you can open the door. programme. 4. Press the On/Off button for a few Turn the programme dial to set a new seconds to deactivate the appliance.

  • Page 32: Care And Cleaning

    • Always start a washing programme sanitization with the maximum load of laundry – liquid detergents, preferably for allowed. low temperature wash • If you pre-treat the stains or use a programmes (60 °C max) for all...
  • Page 33 ENGLISH 12.4 Door seal with double lip 2. Run a Cottons programme with the highest temperature. trap 3. Add a small quantity of powder detergent into the empty drum, in This appliance is designed with a self order to rinse out any left residues. cleaning draining system, allowing light fluff fibers that fall off the clothes to be Occasionally, at the end of a...
  • Page 34 12.7 Cleaning the drain pump WARNING! Disconnect the mains plug from the mains socket. Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water.
  • Page 35 ENGLISH 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter. 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing.
  • Page 36 7. If it is necessary, remove fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap.

  • Page 37: Troubleshooting

    ENGLISH 12.8 Cleaning the inlet hose and the valve filter 45° 20° 12.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket.
  • Page 38 13.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the appliance before carrying out any check.
  • Page 39 ENGLISH 13.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
  • Page 40 Problem Possible solution • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the ap- drum.

  • Page 41: Consumption Values

    ENGLISH 1. Press the On/Off button to switch the CAUTION! appliance off. Risk of burns! Make sure 2. Disconnect the mains plug from the that the water mains socket. temperature is not too 3. Pull twice the emergency unlock high and the laundry is not trigger downward and open the hot.

  • Page 42: Technical Data

    Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Delicates 0.43 40°C Wool/Silk 0.14 30°C Standard cotton programmes 0.93 Standard 60°C cotton 0.70 Standard 60°C cotton 0.55...

  • Page 43: Product Information Sheet In Reference To E.u. Regulation 1369/2017

    ENGLISH Spin Speed Maximum spin speed 1351 rpm 1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your domestic cold water storage system.
  • Page 44 The 'standard 60 °C cotton programme' and the 'stand- ard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean nor- mally soiled cotton laundry and they are the most effi- cient in terms of combined energy and water consump- tion.
  • Page 45 ENGLISH...
  • Page 46 www.aeg.com...
  • Page 47 ENGLISH...
  • Page 48 www.aeg.com/shop...

This manual is also suitable for:

L7fe7461biL7fe7461bi3Pnc914580203

Table of Contents