AEG 7000 Series User Manual
Hide thumbs
Also See for 7000 Series:
- User manual (60 pages) ,
- User manual (36 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG 7000 Series
Summary of Contents for AEG 7000 Series
- Page 1 L7FC8432BI User Manual Washing Machine USER MANUAL...
- Page 2 15. CONSUMPTION VALUES..................45 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
- Page 3 ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
- Page 4 – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 8 kg (refer to the •...
- Page 5 ENGLISH • Do not use the appliance before access to the mains plug after the installing it in the built-in structure installation. due to safety manner. • Do not touch the mains cable or the • Do not install or use a damaged mains plug with wet hands.
- Page 6 Prewash such fabrics by hand before pressure switches, thermostats and loading them into the washing sensors, software and firmware machine. including reset software, door, door • Do not touch the glass door while a hinge and seals, other seals, door programme operates.
- Page 7 ENGLISH Control panel Front feet for levelling the appliance Magnetic plate Drain hose Door handle Mains cable Rating plate Inlet hose connection Plate with rubber beater Back feet for levelling the appliance Drain pump filter The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).
- Page 8 5.2 The appliance is equipped with ... 5.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING!
- Page 9 ENGLISH 3. Remove the polystyrene protection from the bottom. 4. Return the appliance in vertical position and remove the socket polystyrene protection. 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose.
- Page 10 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes. We recommend that you keep the packaging and the transit bolts for any movement of the appliance.
- Page 11 ENGLISH The appliance must be level and stable. CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 5.6 Hose and cable connection 1100 mm 1450 mm 1230 mm 960 mm 1360 mm 900 mm The inlet hose 1.
- Page 12 3. Connect the hose to the back of the appliance. Do not turn the inlet hose downwards, but turn it left or right depending on the position of your water tap. 4. Loosen the ring nut to fix it in the correct position.
- Page 13 ENGLISH To a sink spigot Put the drain hose in the spigot and tighten it with the supplied cable tie L. Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink. To a wall-pipe Directly to a built-in drain pipe in the room wall and tighten it with the supplied cable tie...
- Page 14 The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum. Attach it on the top of the appliance where indicated in the drawing. When levelling the appliance under the furniture, DO NOT squeeze the sponge pad.
- Page 15 ENGLISH 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen ~10mm the nut counterclockwise with a 3mm wrench. Adjust the height and turn the nut clockwise to fix it. 5.9 Preparation and assembly of the cupboard door The dimensions of the cupboard door should be: •...
- Page 16 If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O. Make sure that the plate with magnet is on the upper position.
- Page 17 ENGLISH Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5 - 14 mm depending on the depth of cupboard door) on the inner side of the door. The hinges will be fixed to the door by means of the four supplied screws A.
- Page 18 5.10 Electrical connection The power supply cable must be easily accessible after installing the appliance. At the end of installation you can For any electrical work required to install connect the mains plug to the mains this appliance, contact our Authorised socket.
- Page 19 ENGLISH Extra Rinse touch button Prewash touch button Stains touch button On/Off push button 6.2 Display The Temperature area: Temperature indicator . Cold water indicator. Child safety lock indicator. Door locked indicator. Delay start indicator. The digital indicator can show: •...
- Page 20 The spin area: Spin speed indicator No Spin indicator. Spin phase is off. Silent indicator. Rinse Hold indicator. Add garments indicator. it lights at the beginning of the washing phase, when it is still possible to pause the appliance and add more laundry.
- Page 21 ENGLISH 7.6 Prewash • Decrease the spin speed. The display shows only the spin speeds With this option you can add a prewash available for the set programme. phase to a washing programme. • Additional spin options No Spin The corresponding indicator above the touch button illuminates.
- Page 22 7.9 Permanent Soft Plus The Child Lock function may not be available for a few seconds after Set this option to optimise the fabric switching the appliance on. softener distribution and improve fabric softness. 7.12 Delay Start Recommended when you use fabric With this option you can delay the start softener.
- Page 23 ENGLISH Time Save with steam programmes indicator When setting a steam programme, this button allows to chose three steam levels and the programme duration is reduced accordingly: • : maximum. • : medium. ■ ■ ■ • : minimum. ■ ■...
- Page 24 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and level of soiling) perature Spin speed load Temperature range range 1200 rpm 2 kg Do not use fabric softener and (1200- 400 Outdoor make sure that there is no soften-...
- Page 25 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and level of soiling) perature Spin speed load Temperature range range 1 kg Cottons, Synthetics, Delicates. Short and gen- tle steam programme to refresh even your very Steam delicate garments, including very delicate gar- ments with sequins, lace etc.
- Page 26 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and level of soiling) perature Spin speed load Temperature range range 1200 rpm 3 kg Cotton and synthetic items lightly soiled or (1200- 400 once worn. 20min 3kg rpm) 30 °C...
- Page 27 ENGLISH Programme options compatibility Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Eco 40-60 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■...
- Page 28 Programme Universal Liquid Uni- Liquid for Delicates Special versal coloureds woollens powder ▲ ▲ 20min 3kg ▲ ▲ ▲ Sport ▲ ▲ ▲ Denim ▲ ▲ Wool/Silk 1) At temperature higher than 60 °C the use of powder detergent is recommended.
- Page 29 ENGLISH This action activates the drain system. This removes all possible dirt from the 3. Pour a small quantity of detergent drum and the tub. into the compartment marked by 4. Set and start a programme for cotton at the highest temperature without any laundry in the drum.
- Page 30 • Do not exceed to liquid Always follow the detergent dose indicated on the instructions that you find on flap. the packaging of the • Do not set the prewash phase. detergent products, but we • Do not set the delay start recommend that you do not function.
- Page 31 ENGLISH 11.8 The ProSense System The related indicator stops flashing and stays on. load detection The programme starts, the door is locked. The display shows the indicator The programme duration in the display is referred to a medium/high load. The drain pump can operate shortly before the appliance After touching the Start/Pause button, fills water.
- Page 32 11.11 Opening the door - The ProSense detection is Adding garments carried out with complete washing programmes only If the temperature and level and if the programme of the water in the drum are duration has not been too high and/or the drum is...
- Page 33 ENGLISH 11.13 Draining water out after 4. Press the On/Off button for a few seconds to deactivate the appliance. end of cycle 11.14 Stand-by function If you have chosen a programme or an option that does not empty out the The Stand-by function automatically water of the last rinse, the programme is deactivates the appliance to reduce the...
- Page 34 (refer to "Daily woollens only. Use" chapter); • The choice and quantity of detergent b. manually redistribute the load so will depend on: type of fabric...
- Page 35 ENGLISH domestic system. Refer to 'Water use a water softener for washing hardness'. machines. In areas where the water • Set the maximum possible spin hardness is soft it is not necessary to use speed for the selected washing a water softener. programme before drying your To find out the water hardness in your laundry in a tumble dryer.
- Page 36 13.4 Descaling Clean it when needed, using ammonia cream cleanser agent without scratching If the water hardness in your the seal surface. area is high or moderate, we Always obey the instructions recommend that you use a that you find on the water descaling product for packaging of the product.
- Page 37 ENGLISH 1. Open the drawer. Press the catch 4. Insert the detergent drawer into the downwards as indicated in the guide rails and close it. Run the picture and pull it out. rinsing programme without any clothes in the drum. 2.
- Page 38 Proceed as follows to clean the pump: 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter.
- Page 39 ENGLISH 6. Turn the filter anti-clockwise to remove it 7. If it is necessary, remove fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8.
- Page 40 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water.
- Page 41 ENGLISH 13.12 Frost precautions 4. Empty the drain pump. Refer to the emergency drain procedure. If the appliance is installed in an area 5. When the drain pump is empty, where the temperature can reach values install the inlet hose again. around 0°...
- Page 42 • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. The appliance does For this information, contact your local water authority. not fill with water • Make sure that the water tap is not clogged.
- Page 43 ENGLISH Problem Possible solution • Make sure that the mains plug is connected to the mains sock- • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
- Page 44 Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature.
- Page 45 ENGLISH 4. Take out the laundry and then close the appliance door. 15. CONSUMPTION VALUES 15.1 Introduction This user manual reports two different tables in order to favour a gradual passage from a regulation to the other: • Regulation EU 1061/2010, valid up to 28th of February 2021, is related to the Energy Efficiency classes from A+++ to D, •...
- Page 46 Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme. 15.3 According to Commission...
- Page 47 ENGLISH 15.5 Common programmes These values are indicative only. Programme Litres h:mm °C Cottons 1.75 3:45 1400 90°C Cottons 0.75 3:30 1400 60°C Cottons 0.25 2:50 1400 20°C Synthetics 0.65 2:20 1200 40°C Delicates 0.30 0:50 1200 30°C Wool 0.25 1:05 1200 30°C...
- Page 48 www.aeg.com/shop...