Shutting Down; Suspending System Operation - Fujitsu Stylistic ST6010 User Manual

Shutting Down

Follow these steps to shut down/turn off your system:
1
If system operation has been suspended, resume system operation. See "Resuming System Operation" later
in this chapter for details.
2
Save your work and close all running programs.
3
Choose Shut Down from the Windows Start menu.
4
Carry out the Shut Down command.
The system is now in the Off state.

Suspending System Operation

The Tablet PC allows you to suspend the system operation without closing programs or exiting the
operating system. Use this feature to conserve battery power when a system shutdown is not practical or
when the battery needs to be changed.
I
F YOU HAVE SET YOUR SYSTEM TO TURN POWER OFF FROM THE
C
ONTROL
SHUTS THE SYSTEM DOWN RATHER THAN SUSPENDING IT
S -> S
TART
To suspend system operation:
1
Press the Suspend/Resume button, or carry out the Sleep command from your operating system or power
management program. (If your system is configured to suspend operation using Hibernate mode, which is
explained later in this procedure, a message is displayed while data is saved to your hard disk.)
2
The Power icon either flashes (Sleep) or is not displayed (Hibernate) when system operation is suspended,
depending on how your system is configured. At this point, programs that were running are stopped, active data
is saved, and the system enters one of two different low-power states, or sleep modes, as explained in the
following paragraphs.
P ,
ANEL THE FOLLOWING PROCEDURE WILL NOT BE POSSIBLE
-> C P
ETTINGS ONTROL ANEL
53 - Starting the Tablet PC
P
OWER
. T
O CHANGE YOUR POWER OPTIONS
-> P O .
OWER PTIONS
O
PTIONS UTILITY IN THE
,
SINCE PRESSING THE BUTTON
,
GO TO