Fujitsu Stylistic ST6010 User Manual page 49

Icon Appearance Current State
Power icon
Sleep
blinking
Power icon not Off State, or,
displayed Hibernate
* Information in Table 1 is supplied to help you understand which system states your system can enter
from the current system state. Refer to the procedures on starting the system, shutting down the
system, suspending system operation, and resuming system operation given later in this chapter.
†
Your system may be configured to use either Sleep mode or Hibernate mode.
When you use your Tablet PC, you can change the current system state in a number of ways, depending
on the system's current state. To determine the current system state, observe the Power icon in the Status
display. Table 1 on page 48 gives the different system states represented by the Power icon and describes
how you can change the system state from the current state.
† To enter the On state, resume system operation by pressing the
Suspend/Resume button.
To enter the Off state, resume system by pressing the Suspend/Resume
button, then shut down your system.
To enter the On state, start your system, or resume system operation by
pressing the Suspend/Resume button.
Table 1. Changing System States
48 - System States
*
To Change State