Fujitsu Stylistic ST6010 User Manual page 30

In the following table, a "blinking" LED flashes at the rate of once per second; an LED that is "blinking, slow" flashes at the rate of one second on,
five seconds off.
Icon
HDD Access • On State (or
flashing)
• Idle Mode
• Sleep
• Hibernate
• Off State
Security • On State
Power • On State
• Idle Mode
• Sleep
• Off State
• Hibernate
Mode/State
Green
Off
Green, continuous
(until password is
entered)
Green, continuous
Green, blinking
Off
LED State
Displayed when hard disk drive is accessed.
Hard disk drive is not being accessed.
The Security Indicator lights (if a password was set)
when the system resumes from Off or Sleep modes. You
must enter the password that was set in the Security
Panel before your system will resume operation. See
"Security Functions of Application Buttons" on page 36.
The system is powered on and ready for use.
The system has suspended and saved active settings to
RAM.
The system has suspended and saved settings and data
to the hard disk drive.
Table 1. System Status Indicators
29 - Status Display
Remarks