Table of Contents
Advertisement
Note:
If you do not specify the DNS servers, the router uses the DNS servers
that are configured for the IPv4 Internet connection on the Internet Setup
screen. (See
4.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
5.
In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of
the router's LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
6.
Click the Apply button.
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1.
Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select DHCP.
The screen adjusts:
The router automatically detects the information in the following fields:
•
Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router's WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
R6000 WiFi Router
Internet Setup
on page 20.)
Advanced Settings
103
Advertisement
Table of Contents
