Other Connections; Connecting A Subwoofer; Wired Network Connections - Yamaha YSP-5600BMK2 Owner's Manual

1 2 3 4 5 6
d Other connections

Connecting a subwoofer

A subwoofer can be connected to the unit for use with the unit. There are two ways to
connect a subwoofer to the unit: use a third-party RCA monaural cable, or use the
optional wireless subwoofer kit SWK-W16 to connect via a wireless connection.
Connecting a subwoofer via cable
Use a third-party RCA monaural cable to connect the subwoofer to the unit via the
monaural input jack on the subwoofer and the SUBWOOFER OUT jack on the unit.
When connecting a Yamaha subwoofer equipped with a system connector, connect a
system control cable (or third-party 3.5mm monaural mini plug cable) to the SYSTEM
CONNECTOR on the unit. This connection is required to turn the unit and subwoofer on
and off at the same time.
The unit (rear)
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
UPDATE ONLY NETWORK
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN IR-OUT RS-232C
CONNCETOR OUT AUX1
SYSTEM SUBWOOFER
CONNECTOR OUT
When the unit is connected to the subwoofer via the cable, set the subwoofer output to
"Wired" in the setup menu (p. 73)
• See documentation supplied with the subwoofer for more information.
Using the optional wireless subwoofer kit SWK-W16
The optional wireless subwoofer kit SWK-W16 enables wireless connection of a
subwoofer to the unit.
When using the wireless subwoofer kit, set subwoofer output to "Front/Wireless"
Subwoofer
(default setting) in the setup menu (p. 73).
The unit and the wireless subwoofer kit are automatically connected via wireless
connection when the unit is turned on, or when subwoofer output in the setup menu is
set to "Front/Wireless".
• See "Troubleshooting" (p. 90) if the indicator on the wireless subwoofer kit does not glow green.
INPUT SYSTEM • See the Owner's Manual supplied with the wireless subwoofer kit SWK-W16 for information regarding
CONNECTOR
SWK-W16 and subwoofer connection.
• The wireless subwoofer kit SWK-W16 cannot be used while the subwoofer is connected to the unit via
cables.
• The SWK-W16 may not be available in some countries or regions.

Wired network connections

For a wired connection, connect one end of the network cable to the NETWORK jack on
the rear panel of the unit and the other end to a router. For details, refer to
"NETWORKS" (p. 49).
SWK-W16
Subwoofer
PREPARATIONS ➤ d Other connections
25
En