Useful Features And Functions - Casio XJ-V2 User Manual

Useful Features and Functions

 Mercury-free Hybrid Light Source
A CASIO-original laser and LED hybrid light source delivers high luminance up to 2,700 lumens
(XJ-V1)/3,000 lumens (XJ-V2). This projector does not use a mercury lamp, making it
environmentally friendly.
 No-wait Projection
A CASIO hybrid light source reaches maximum brightness immediately after power is turned on,
compared with a wait of approximately one minute normally required with a mercury lamp. The light
source will even reach maximum brightness immediately if you turn it back on right after you turn it
off. A mercury lamp requires a longer wait in this case to cool down.
 Eco Mode
You can select from among five levels that provide different combinations that balance power
saving with projection brightness.
 Support for Three Input Sources
Analog RGB, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input sources are supported.
 Vertical Keystone Correction
Manual adjustment to correct for vertical keystoning (distortion of the projected image shape
caused when projecting from below or above the projection surface) and return the projected image
to a rectangular shape.
 AUDIO OUT Terminal for Audio Output
Audio input via the projector's HDMI terminal or AUDIO IN terminal is output from its AUDIO OUT
terminal. Amped speakers or other equipment can be connected to the AUDIO OUT terminal when
you want to output audio from another device via the projector.
 Ceiling Mounted and Rear Projection Support
The projector can be configured to project an image of normal orientation even when installed
upside down (for ceiling projection) or when projecting from behind the screen.
 Direct Power On
The projector can be configured to turn on automatically and start projecting as soon as it is
plugged into a power outlet.
 Firmware update
Firmware (software in the projector flash ROM) updates can be transferred to the projector from a
computer as required.
5