Sharp GX293 Manual page 93

Vibration
When the vibrator option is set on, the phone will vibrate for
incoming calls regardless of the ringer volume and tone
settings.
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Vibration".
4.
Select from "Enable", "Disable" or "Link to Sound".
Tip
• When the "Link to Sound" option is selected in step 4, the
vibrator synchronises with your selected melody to pulse in
time with the melody. Please note that not all melodies
support the "Link to Sound" option. Should you select such
a melody, only the "Enable" option in step 4 will allow
vibrator function.
• When you select "Enable" or "Link to Sound" in step 4,
" " is displayed on the stand-by screen.
Alerts
You can personalise profiles for alerts including warning tone,
message alert and low battery alert.
Warning Tone
This function enables your phone to emit the warning tone
when an error occurs.
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Alerts".
4.
Select "Warning Tone".
5.
Select "Switch On/Off".
6.
Select "On" or "Off".
7.
Select "Volume" and select from "High", "Middle" or
"Low".
8.
Select "Tone" and select "Preset Melodies" or "Sound
Gallery".
9.
Select the desired tone.
For details on selecting a ringtone, see "Assigning Melody"
on page 92.
Profiles 93