Melody Editor - Sharp GX293 Manual

(M 3-6)

Melody Editor

You can create an original ringtone, or you can send a melody
attached to a MMS message.
You can input up to 95 tones × 32 voices, 190 tones × 16
voices, or 380 tones × 8 voices per melody.
The original ringtone is stored in Sound Gallery.
Creating Your Original Ringtone
→
"Organiser" "Melody Editor"
1.
Enter the title.
Up to 24 characters can be entered.
2.
Select a tempo.
The music tempo is described below.
• "Allegro (Fast)":
• "Moderato (Normal)":
• "Andante (Slow)":
• "Adagio (Very Slow)":
3.
Select from "8 Chords", "16 Chords" or "32 Chords".
4.
Press the digit keys to specify the musical scale and
rest.
For details on specifying the sound level and rest, see "To
Specify the Musical Scale and Rest" on page 87.
5. Press P or R to specify the types of musical notes
or rest.
86 Organiser
(M 3-6-1)
→
"Create New"
150
125
107
94
For details on specifying the musical notes and rest, "To
Specify the Types of Notes and Rests" on page 88.
6. Press d after inputting one note.
Input the next note after the cursor moves to the right.
7.
Repeat steps 4 to 6 to input notes.
When entering notes, you can do the following:
• Press to play back all input notes.
• Press [Options] and select:
"Play before cursor" to play back notes up to the cursor
position.
"Select Part" to select another chord.
"Set Tone" to set or change the tone using different
instruments. (p. 88)
"Set Strength" sets the strength of the original ringtone.
(p. 89)
• To specify the types of notes or rests, see page 88.
8.
When you finish inputting, press [Options] and select
"Save".
9.
Select "Save to Gallery".