Sharp GX293 Manual page 23

Call Waiting
This service notifies you of another incoming call whilst you
have a call in progress.
1.
During a call, press [Options] and select "Hold &
Answer" to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
2.
Press [Options] and select "Swap Calls" to switch
between the two calls.
3.
Press [Options] and select "Release Call" to end the
current call and return to the held call.
Note
• You need to set "Call Waiting" to "On" if you use the Call
Waiting service (p. 104).
• Call Waiting service may not be available on all networks.
Contact your network operator for more information.
• If you do not wish to answer the second call, press [Busy], or
press [Options], and select "Busy" or "Reject", in step 1. If
"Reject" is selected, the call log of the second call is saved
as a missed call.
Accessing SMS Menu During a Call
1.
During a call, press [Options] and select "SMS".
The following options are available: "Create Message" to
make an SMS, or "Inbox", "Sent" or "Drafts" to access
these folders. For details on SMS, see "SMS" on page 56.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
To make a conference call, you must have one active call and
one held call.
1.
During a call, press [Options] and select "Multiparty" to
answer the second call.
2.
Select "Conference All" to join the conference call.
Press F to end the conference call.
3.
Note
• Conference call service may not be available on all networks.
Contact your network operator for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select "Conf. Hold All".
• To put all participants except the current call on hold,
select "Private".
• To end the call with all participants, select "Release All".
Call Functions 23