Performing A Measurement Without App - Philips DL8780/37 Manual

< 16ft

Performing a measurement without app

-
Weight is shown on the display of the scale after weight
measurement ends.
4 BIA measurement starts (when measuring barefoot).
-
The symbol 'BIA' flashes on the display to indicate the scale is analyzing
your data.
5 Stand still and keep full contact with the measurement platform until
the symbol 'BIA' stops flashing. The device beeps to indicate that the
measurement is completed. The results of the BIA are shown in the app.
6 With the scale successfully connected to your mobile device,
the measurement data is automatically transmitted to your mobile
device via Bluetooth®.
-
The Bluetooth® symbol on the scale flashes while the measurement data
is transmitted to the app.
-
The measurement results are shown and stored in the health app.
7 After measuring, step off the scale. The scale switches off automatically.
The scale can be used without the app. This allows you to measure your
weight. When you have created a user profile in the scale, you can measure
your weight and perform BIA. You can also upload your measurement
data to the health app later on, when the scale and your mobile device
are connected. Results of the body analysis measurement can only be
accessed using the Philips HealthSuite health app. The scale cannot directly
communicate BIA results to the user.
1 Step onto the scale barefoot to switch it on. The device beeps to indicate
it is ready for weighing.
-
You can take a measurement barefoot. The device is able to perform the
weight measurement and the BIA measurement and later on store the
measurement data in the health app. Make sure your feet are clean and
slightly damp.
-
You can also take a measurement wearing footwear. The scale is
only able to perform the weight measurement and not the body fat
estimation and BMI calculation. Your measurement results will not be
stored or sent to the health app.
2 Weight measurement starts.
English
15