1. Manuals
  2. Brands
  3. Epson Manuals
  4. Disc Duplicator
  5. PP-100NII
  6. Administrator's manual

Epson Discproducer PP-100NII Administrator's Manual

Hide thumbs Also See for Discproducer PP-100NII:
Table of Contents

Advertisement

Quick Links

Download this manual
Administrator's Guide
M00133100EN

Advertisement

Table of Contents
loading

Related Manuals for Epson Discproducer PP-100NII

Summary of Contents for Epson Discproducer PP-100NII

  • Page 1 Administrator’s Guide M00133100EN...

  • Page 2: Trademarks

    Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

  • Page 3: Organization Of This Manual

    Organization of this manual The following instruction guides are included with this product. PP-100NII Setup Guide Briefly describes how to set up this product with illustrations. See the PP-100NII Administrator’s Guide for more information. PP-100NII User’s Guide (PDF) Presents detailed information users need to know such as how to install the software, the product functions and operations, as well as maintenance information.

  • Page 4: Table Of Contents

    Table of Contents ■ Setting the language..........42 Trademarks..............2 Marks used in this guide..........2 Screens and Procedures in This Guide .......2 Organization of this manual ........3 Administration and Management ..........43 Before Using This Product..6 ■ Managing jobs .............43 ■ For safe use ............6 Checking job information..........
  • Page 5 ■ Checking with EPSON Total Disc Monitor ..83 ■ When discs cannot be published ...... 85 ■ Disc does not come out........87 Drive tray does not come out........87 Printer tray does not come out ........88 ■ Disc recording surface is stained with ink ..91 Appendix ........

  • Page 6: Before Using This Product

    Before Using This Product Before Using This Product For safe use • To use this product safely, be sure to read this guide as well as the other instruction guides included with this product before using it. • Keep this guide at hand so that you can resolve any questions you have about this product. To prevent harm to customers and other people or damage to property, this guide contains the following symbols and warning displays for operations and use that may be dangerous.
  • Page 7 Before Using This Product Install this product in the following type of place. Place with the following temperature and Place that is flat and stable humidity range • When using this product in a place where static electricity is easily generated, use an antistatic mat or other product to prevent static electricity.

  • Page 8: Cautions For The Power Source

    Before Using This Product Cautions for the power source Do not connect or disconnect the power plug with wet hands. This may result in electric shock. WARNING Use only the type of power source indicated on the product’s label. Use of the wrong type of power source may result in electric shock or fire. Do not plug the power cord into an outlet with many other cords connected to it.

  • Page 9: Cautions For Using

    This may result in electric shock or fire. Immediately turn off the power, disconnect the power plug from the outlet, and contact your dealer or the Epson Repair Center about repairs. Servicing the product yourself is dangerous, so never attempt it.
  • Page 10 Before Using This Product For safety reasons, if you move this product, first check that the power is off, the power plug is disconnected from the outlet, and all of the wires are disconnected. When replacing the ink cartridges, be careful that the ink does not contact your eyes or skin.

  • Page 11: Cautions For Cd/Dvd/Bd Discs

    • During a malfunction or repair • When there is damage due to a natural disaster Even if the product is still under warranty, Epson accepts no responsibility for data that is lost or damaged due to causes not limited to those listed above.

  • Page 12: Preparation

    Preparation Preparation Installation Install this product in a suitable location with adequate space. • Make sure that the product is lifted by two people. CAUTION • The weight of this product is approximately 26 kg. When this product is lifted, it should be lifted on both sides by two people holding the recesses on the sides as shown in the illustration on the left.

  • Page 13: Installation Location Requirements

    Preparation Installation location requirements Install this product in the following type of location. • Flat, stable location that can fully support the product weight (approx. 26 kg) • Location that is wide enough to fully hold the product base • Location where the air vents on the product are not blocked •...

  • Page 14: Setup Procedure

    Preparation Setup procedure This section describes the setup procedure for this product (PP-100NII). Before starting setup, check that all protective tape and protective materials attached to this product have been removed. See PP-100NII Setup Guide for the procedure to remove the protective materials.

  • Page 15: Connecting The Ethernet Cable

    Preparation Connecting the Ethernet cable Connect the Ethernet cable to the Ethernet interface connector on the rear side. Connecting the power cord Connect the power cord connector to the AC inlet on the product rear side. (See (1) in the figure below.) Insert the power plug into the outlet.

  • Page 16: Installing The Ink Cartridges

    • Epson cannot guarantee the quality and reliability of non-Epson brand products. Repairs for any damage or breakdown of this product due to the use of non-Epson brand products will not be free of charge even if the warranty period is still valid.
  • Page 17 Preparation Remove the ink cartridge from its package. • The first time you install ink cartridges, use the ink cartridges supplied with the product or use ink cartridges in which there is a sufficient amount of ink remaining. • For optimum printing quality, do not open the transparent plastic package until immediately before installation.
  • Page 18 Preparation Close the ink cartridge cover. Press the power button to turn on the power. The Power LED flashes, and ink filling (loading ink) is started. • When using for the first time, the product operates to prepare the internal components of the product (loading ink).

  • Page 19: Setting The Security Lock Switch

    Preparation Setting the security lock switch Set the security lock switch for automatically locking the disc cover. In the initial state, the security lock switch is set to off. Open the disc cover. Set the security lock switch to ON or OFF. When set to ON: The disc cover is locked automatically each time it is closed.

  • Page 20: Setting The Publish Mode

    Preparation Setting the Publish Mode This product has the following Publish Modes: Standard Mode, External Output Mode, and Batch Mode. Select the mode that is used based on the disc publishing quantity and application. Mount the stackers based on the selected mode, and set the Publish Mode.
  • Page 21 Preparation External Output Mode You can select Stacker 3 or Stacker 4 as the output stacker. If you select Stacker 4 as the output stacker, you can easily take out published discs without even having to pause a job during publishing. The External Output Mode allows you to use the product in the following ways according to the application.
  • Page 22 Preparation Batch Mode This mode uses Stacker 1 and Stacker 2 as the input stackers for discs, and Stacker 2 and Stacker 3 as the output stackers. Loading 50 discs in each of Stacker 1 and Stacker 2 allows for the continuous publishing of 100 copies of the same disc without having to replenish the discs or take out published discs.

  • Page 23: Installing The Stackers

    Preparation Installing the stackers After the Publish Mode is determined, use the procedure below to install the stackers for the selected mode. Insert Stacker 1 by aligning with the recesses. Insert Stacker 2 by aligning with the recesses.
  • Page 24 Preparation If using Batch Mode, or when Stacker 3 is set as the output stacker in External Output Mode, grasp the handle of Stacker 3, and insert by aligning with the recesses. • When using Stacker 3, set the lock lever to the [LOCK] position, and do not pull out Stacker •...

  • Page 25: Setting Procedure

    Preparation Setting procedure After installing the stackers, use the procedure below to set the Publish Mode. In the mode selection screen displayed on the LCD, use ▲/▼ to display the Publish Mode to use, and press the button. Mode selection Standard When the confirmation message appears, press the button.

  • Page 26: Network Settings

    Preparation Network settings The network can be set in the following two ways. • Performing an operation from a PC • Performing an operation with the product’s control panel When performing the setup for the first time, carry out the network setup using the control panel. The network settings cannot be made using a computer until an administrator is registered.
  • Page 27 Preparation Use the ▲/▼ buttons to display the change settings (“Change settings IP address”) screen for the IP address, and press the button. Change settings IP address Use the ▲/▼ buttons to select the setting method, and press the button. When “Manual”...
  • Page 28 Preparation Use the ▲/▼/ buttons to enter the default gateway, and press the button. Default gateway XXX. XXX. XXX. XXX When the change setting confirmation message (“Change network settings?”) appears, press the button. Change network settings? • If necessary, set the Jumbo Frame. (“Top menu” - “Network” - “Change Settings” - “JUMBO FRAME”) In the initial state, Jumbo Frame is set to off.
  • Page 29 (“Top menu” – “Network” – “Change settings” – “Link speed/JUMBO FRAME”). Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [Network] tab in the [System settings] screen.
  • Page 30 Preparation Click [OK].

  • Page 31: Registering An Administrator

    Preparation Registering an administrator Register an administrator who will administer and manage the product. After registering the administrator, other users who will use the product can be registered. (See “Registering users” on page 52 in this guide for the procedure to register the user.) Start Internet Explorer on the computer, and enter the IP address that...
  • Page 32 Preparation • The user name and password that were set are used to log in to EPSON Total Disc Net Administrator. • Enter a full name and email address if necessary. An email address needs to be entered if notification email transmission is set. See “Notification email transmission settings” on page 36 in this guide for details on the notification email transmission settings.

  • Page 33: System Settings

    This is used to select the type of disc that is used, make the drive settings, and make the settings when a write error occurs. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [System settings] tab.
  • Page 34 Preparation Device name: The name of the connected product can be set. Publish Mode • Mode: This displays the Publish Mode that was set. The Publish Mode can also be changed. • Stacker 1: Select the type of disc that is used. •...
  • Page 35 The error mark will not be printed in the following cases. • The job was cancelled in the EPSON Total Disc Monitor. • Not enough ink was left to print the error mark • Fatal error Notification settings •...

  • Page 36: Notification Email Transmission Settings

    Preparation Notification email transmission settings Settings can be made for sending emails, which pertain to disc publishing, notify when the ink must be replaced, or notify about problems that have occurred, to the administrator. • When a notification email is received, measures must be taken by following the instructions contained in the email.
  • Page 37 Preparation <Example of a notification email>...
  • Page 38 Use the procedure below to make the notification email settings. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [Email] tab in the [System settings] screen.
  • Page 39 Preparation Email settings • Language for outgoing mail: Select the language to use in notification email from the languages below. Japanese, German, English, Spanish, French, Italian, Dutch, Portuguese • SMTP server: Enter the IP address or host name and port number of the SMTP server that is used to send notification email.

  • Page 40: Setting The Date And Time

    This sets the product’s internal clock. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [Date/Time] tab in the [System settings] screen.
  • Page 41 Preparation Select[Time zone], and if daylight saving time is used, select the check box for [Daylight Saving Time], and click [Save]. Click [OK].

  • Page 42: Setting The Language

    Preparation Setting the language After you set the Publish Mode (see page 20 in this guide), you can change the language setting for messages displayed on the LCD of this product from English to Spanish, French, Italian, Dutch, Portuguese, Japanese, or German.

  • Page 43: Administration And Management

    You can check the history and detailed information of jobs on the [Job management] screen after logging in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.

  • Page 44: Checking The Job Processing Status

    Use the following procedure to check the job processing status. Start EPSON Total Disc Monitor. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for the start procedure. Click the [Unfinished Job] tab or [Finished Job] tab. The [Unfinished Job] screen or [Finished Job] screen appears.

  • Page 45: Pausing Jobs

    Only a job for which the status is Waiting, Publishing, Standby, or Recovering can be paused. Start EPSON Total Disc Monitor. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for the start procedure. Select the job for which you want to pause processing, and click [Pause].

  • Page 46: Resuming Jobs

    Only a job for which the status is Paused or Pausing can be resumed. Start EPSON Total Disc Monitor. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for the start procedure. Select the job for which you want to resume processing, and click [Resume].

  • Page 47: Canceling Jobs

    Only a job for which the status Waiting, Publishing, Paused, Pausing, Standby, or Recovering can be canceled. Start EPSON Total Disc Monitor. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for the start procedure. Select the job you want to cancel, and click [Cancel].

  • Page 48: Priority Publishing

    If you need to process a job before the others when more than one job is being published, use the following procedure. Start EPSON Total Disc Monitor. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for the start procedure. Select the job you want to give priority to, and click [Priority Publishing].

  • Page 49: Deleting Jobs

    Use the following procedure to delete spool data and job history when, for example, there is little free space remaining on the product’s hard disk. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click [Delete job].
  • Page 50 Administration and Management Select the check box for the job you want to delete, and click [Delete spool data] or [Delete spool data and job history]. Click [OK] in the deletion confirmation message that appears.

  • Page 51: Managing Users

    Use the following procedure to check registered user information. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [User management] tab.

  • Page 52: Registering Users

    Use the following procedure to register a second or subsequent administrator or publisher. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [User management] tab.
  • Page 53 Administration and Management Enter the user name and password, and then enter the password again for confirmation, and click [Save]. • To add an administrator, select the [Administrator] check box. • Enter 5 to 16 alphanumeric characters for the user name. •...
  • Page 54 Administration and Management Click [OK] in the confirmation message that appears. The user list of the [User management] screen appears. Check that the user is registered correctly. Inform the user of the set user name and password. The user changes the password after logging in.

  • Page 55: Changing User Information

    Use the following procedure to change registered user information. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [User management] tab.
  • Page 56 Administration and Management Change the full name, mail address, and authority of the user as necessary, and click [Save]. Click [OK] in the update confirmation message that appears.

  • Page 57: Deleting User Information

    Use the following procedure to delete registered user information. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [User management] tab.

  • Page 58: Changing Password

    Manage the password so that it cannot be used by anyone other than the user. Log in toEPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.
  • Page 59 Administration and Management Click [Change password]. Enter the new password, and click [Save]. • Enter 5 to 16 alphanumeric characters or symbols (“. ” , “ -”, “_”) for the password. • The password is case-sensitive. • Do not set a date of birth, employee number, or anything else that is easy to guess for the password.

  • Page 60: Changing The Publish Mode

    See “Checking the job processing status” on page 44 in this guide for details on the check procedure. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.
  • Page 61 Administration and Management Click [OK]. Insert a stacker in accordance with the Publish Mode. See “Installing the stackers” on page 23 in this guide. The operation of this product differs depending on the Publish Mode setting. To prevent the occurrence of an unexpected warning or error, check that the correct Publish Mode has been set after you change the Publish Mode.

  • Page 62: Maintaining Your Product

    [Save As] of the [File] menu for files of EPSON Total Disc Maker. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.
  • Page 63 Maintaining Your Product Click [Backup]. Click [OK]. Specify the save location for the backup file, and then save the backup file.

  • Page 64: Restoring Data

    • A backup file of a different Publish Mode cannot be restored. Log in to EPSON Total Disc Net Administrator. See “Logging In to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [Data] tab on the [Maintenance] screen.

  • Page 65: Restoring To Initial State

    See “Checking the job processing status” on page 44 in this guide for details on the check procedure. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.
  • Page 66 Maintaining Your Product Click [Factory reset]. Click [OK]. The BUSY LED flashes, and initialization begins. Initialization takes two to three minutes. Never turn the power off during initialization. When initialization is finished, the mode selection screen appears on the LCD.
  • Page 67 Maintaining Your Product Performing an operation with the product’s control panel Check that all jobs are finished. See “Checking the job processing status” on page 44 in this guide for details on the check procedure. Press the MENU button. The top menu appears. Use the ▲/▼...

  • Page 68: Checking Maintenance Information

    Use the following procedure to check the usage status of the internal drives and the number of published discs. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure.

  • Page 69: Downloading Operation Log

    Use the following procedure to download the operation log file. Log in to EPSON Total Disc Net Administrator. See “Logging in to EPSON Total Disc Net Administrator” in the PP-100NII User’s Guide for the login procedure. Click the [Data] tab on the [Maintenance] screen.

  • Page 70: Troubleshooting

    Troubleshooting Troubleshooting Refer to this information together with the Help file for EPSON Total Disc Monitor. Error messages and remedies When a problem occurs with this product, the ERROR LED turns on or flashes, and an error message appears on the LCD.
  • Page 71 Troubleshooting Notification Error Message Remedy Sound Disc drop error The arm dropped the disc while transferring it. Remove the dropped disc, turn off the power, and then turn on the power again. Disc feed error The disc was not transferred properly to the drive. DRV 1/2 Perform the procedure below.
  • Page 72 Troubleshooting Notification Error Message Remedy Sound Disc pickup The arm cannot pick up the disc in the stacker. If the indicated error (ST1/2) stacker is an input stacker, fully separate and reload the discs in the stacker. Disc release The arm cannot release the disc. error Do not remove the disc by hand.
  • Page 73 (No), and change the ink cartridge. Use of non-Epson brand ink cartridges is not recommended. • Use of non-Epson brand ink cartridges can result in problems that will not be covered by the warranty. • Epson cannot guarantee the quality and reliability of non- Epson brand products.
  • Page 74 Troubleshooting Notification Error Message Remedy Sound Print tray -When the printer tray does not come out- open/close error Turn off the power, and then turn it on again. If the drive trays still does not come out, see “Printer tray does not come out”...
  • Page 75 Troubleshooting Notification Error Message Remedy Sound Wait a moment Press the button or CANCEL button. Do not unlock the and try again disc cover repeatedly within a short time. Wait a moment before unlocking. Write error Processing of the job is paused. See “Disc writing problems” on page 78 in this guide, and after removing the cause of the error, restart the job.

  • Page 76: Problems And Their Remedies

    Press the power button to turn off the power, and then open the disc cover and check that there are no foreign objects inside. “EPSON PP-100NII” remains Repair is required. displayed and the product Please contact Customer Support.
  • Page 77 Troubleshooting Symptom/Problem Status Check/Remedy Procedure ERROR LED flashes/turns on. An error has occurred. See “Error messages and remedies” on page 70 in this guide.

  • Page 78: Disc Writing Problems

    If you set [Write Verification] to [Compare] when publishing discs in EPSON Total Disc Maker, you can check whether data was written to the discs correctly. See the Help file for EPSON Total Disc Maker for details.

  • Page 79: Label Printing Problems

    The product supports discs for inkjet printers. This product does not support thermal transfer printer discs. Also, the printing quality may vary depending on the quality of the printing discs. Use of Epson specified CD and DVD discs is recommended.
  • Page 80 Troubleshooting Symptom/Problem Status Check/Remedy Procedure • Rubbing Is there dirt on the disc? • Lines or streaks are formed Gently wipe off any dust or dirt adhering to the label side using a soft • Blurriness cloth or commercial CD cleaner. Do not use benzene, thinner, or antistatic •...

  • Page 81: Password Problems

    You may be asked for an administrator password or confirmation. When asked for a password, enter the password to proceed with operation. The EPSON Total Disc Net Is the power of the product turned off? Administrator login screen is Turn on the power of the product.
  • Page 82 Troubleshooting Symptom/Problem Status Check/Remedy Procedure The drive cannot be used. Is use of the drive stopped? When a write error occurs based on a preset write retry count, use of the drive is automatically stopped, and [Drive operation paused DRV1/2] is displayed on the LCD.

  • Page 83: Checking With Epson Total Disc Monitor

    Troubleshooting Checking with EPSON Total Disc Monitor EPSON Total Disc Monitor is a utility that enables checking of the status of this product (PP-100NII) and the remedy procedures for errors. See “Starting EPSON Total Disc Monitor” in the PP-100NII User’s Guide for details on the EPSON Total Disc Monitor startup procedure.
  • Page 84 Troubleshooting Drive Status This displays the drive status. When is displayed on the drive icon, check the product drive by referring to the displayed message. Printer Status This displays the printer status. When is displayed on the printer icon, check the product printer by referring to the displayed message.

  • Page 85: When Discs Cannot Be Published

    Troubleshooting When discs cannot be published If the disc is not published by clicking [Publish] in the Publish view of EPSON Total Disc Maker, or if the product does not work, check the points below. Check 1: Check of EPSON Total Disc Monitor...
  • Page 86 Is the Print Manager status set to Pause? If [Paused] is displayed for the product’s icon (EPSON PP-100NPRN), right-click the icon and click [Resume Printing]. If performing all of the above checks still does not resolve the problem, the software may not be installed correctly.

  • Page 87: Disc Does Not Come Out

    Troubleshooting Disc does not come out Perform the procedure below if the disc cannot be ejected because the drive tray or printer tray does not come out. Drive tray does not come out Turn the power of the product off and then on again. If the drive tray still does not come out, perform the procedure below.

  • Page 88: Printer Tray Does Not Come Out

    Troubleshooting Printer tray does not come out Turn the power of the product off and then on again. If the printer tray still does not come out, perform the procedure below. Press the power button to turn off the power. After the power LED goes off, disconnect the power plug from the outlet.
  • Page 89 Troubleshooting Slide the top plate backwards slightly to remove it. Remove the four screws on the product rear, and then remove the air vent cover. Remove the screw, and then remove the rear printer cover. If the disc can be removed, eject the disc and attach the rear printer cover. If the disc cannot be removed, proceed to the procedure below.
  • Page 90 Troubleshooting Grasp the fixture as shown in the figure below, and pull out the printer tray towards you. Pull out the printer tray. Remove the disc, and close the disc cover. The printer tray automatically closes when the power is turned on. Reattach the rear printer cover, air vent cover, and top plate.

  • Page 91: Disc Recording Surface Is Stained With Ink

    Troubleshooting Disc recording surface is stained with ink When the disc recording surface is stained with ink, the printer tray may be dirty. Clean the printer tray by following the procedure below. Press the power button to turn off the power. After the power LED is off, disconnect the power plug from the outlet.
  • Page 92 Troubleshooting Slide the top plate backwards slightly to remove it. Remove the four screws on the product rear, and then remove the air vent cover. Remove the screw, and then remove the rear printer cover.
  • Page 93 Troubleshooting Grasp the fixture as shown in the figure below, and pull out the printer tray towards you. Pull out the printer tray. Use a soft cloth to wipe off any dirt on the printer tray. Close the disc cover. The printer tray automatically closes when the power is turned on.

  • Page 94: Appendix

    Where to get help Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact customer support services for assistance. If customer support for your area is not listed below, contact the dealer where you purchased your product.

  • Page 95: Help For Users In Australia

    Appendix Help for Users in Australia Contacts for information, support, and services are: Epson Australia Pty Ltd 3 Talavera Road North Ryde NSW 2113 Australia Phone: 02-8899-3666 Fax: 02-8899-3777 If you need the latest drivers, FAQs, manuals, or other downloadable, access the site at: www.epson.com.au...
  • Page 96 Appendix Fax: 03-5621 2088 Helpdesk: 03-5521 5888 www.epson.com.my Epson (Thailand) CO., Ltd. 195 Empire Tower 42nd Floor, South Sathorn Road Yannawa Sathorn, Bangkok 10120 Thailand, Tel: 0-2685-9888 Fax: 0-2685-9889 Helpdesk: 0-2685-9899 www.epson.co.th Epson Philippines Corporation 8th Floor, Anson's Centre #23 ADB Avenue,...

  • Page 97: Product Specifications

    Appendix Product specifications Basic specifications External dimensions and weight Item Description External dimensions 377 mm (W) x 514 mm (D) x 348 mm (H) Weight Approx. 26 kg (including the stackers and ink cartridges, but not including the power cord and discs) Since this product uses galvanized sheet metal, rusting may occur at the edges, but this will not harm the functionality of the product.
  • Page 98 Conditions: When using Epson specified DVD-Rs, drive speed of 12x, writing data of 3.8 GB, and speed/bidirectional printing 8.5 discs/hr When using Epson specified BD-R, drive speed of 8x, writing 23.8 GB data, and speed/bidirectional printing. Print only Quality/Speed: [2]...
  • Page 99 Appendix Ink cartridge Item Description Form Separate ink cartridge for each color Color Black, cyan, magenta, yellow, light cyan, light magenta Recommended expiration date Use within the expiration date labeled on the ink cartridge. Use within 6 months of opening the package. Temperature When stored -20~40°C...
  • Page 100 • If you select 2.4x for DVD-R/DVD-R DL, write speed will be set to 2x. • If you select 2x for DVD+R/DVD+R DL, write speed will be set to 2.4x. • 8x write speed is possible only when Epson BDs specified for 8x write speed are used. Electrical specifications...
  • Page 101 Appendix Lifetime Item Description Lifetime 5 years after purchase or until 30,000 discs* have been published, whichever is shorter. Maintenance parts Drive (for one unit) Whichever is shorter from the following: • Opening and closing of the drive tray: 30,000 times •...

  • Page 102: Ink And Disc

    To purchase a Discproducer Series exclusive ink cartridge, check with the dealer where you purchased your product or access either of the following urls: www.epson-europe.com (Europe) www.epson.com/support/ (United States and Canada) Discs Epson offers the specified discs for all your writing and printing needs.

Table of Contents