Honeywell Fire-Lite Alarms ES-200X Manual page 126

USB Upload/Download
Pressing 2 for Yes will cause the following screen to be displayed:
An error message will display if there is no USB drive inserted in the FACP or if there is no existing configuration saved on the USB
drive.
While this screen is displayed, local programming downloads are allowed. Exiting this screen will disable any further downloads to a
flash drive. Also, following 30 minutes of inactivity (including up/downloading), the Accept Download screen will time-out, causing the
display to return to the System Normal screen.
Important!
The program database created by the FS-Tools programming utility will be called, "FS_200.cfg" on the USB flash drive. Before loading
the new database into the fire panel, the existing database will be saved as file, "FS_200.bak" on the USB flash drive. Only one new and
one saved database can reside on the USB flash drive.
126
USB UP/DOWNLOAD
SYSTEM CONFIGURATION
TRANSFER IN PROCESS
PLEASE WAIT
ES-200X Series Manual — P/N LS10131-000FL-E:C 7/25/2018
USB Upload/Download