Black & Decker BEG210 Original Instructions Manual
Hide thumbs
Also See for BEG210:
- Original instructions manual (33 pages) ,
- Manual (17 pages) ,
- Original instructions manual (137 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker BEG210
Summary of Contents for Black & Decker BEG210
- Page 1 BEG110 BEG120 www.blackanddecker.eu BEG210 BEG220...
-
Page 4: Intended Use
Intended use protected supply. Use of an RCD reduces the risk of electric shock. Your BLACK+DECKER BEG110, BEG120, BEG210 and BEG220 angle grinders have been designed for grinding and 3. Personal safety cutting metal and masonry using the appropriate type of a. - Page 5 (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Do not use a damaged accessory. Before each use binding of moving parts, breakage of parts and any inspect the accessory such as abrasive wheels for other condition that may affect the power tools chips and cracks, backing pad for cracks, tear or operation.
-
Page 6: Kickback And Related Warnings
ENGLISH (Original instructions) Do not use accessories that require liquid coolants. The grinding surface of centre depressed wheels Using water or other liquid coolants may result in must be mounted below the plane of the guard lip. An electrocution or shock. improperly mounted wheel that projects through the plane Note: The above warning does not apply for power tools of the guard lip cannot be adequately protected. -
Page 7: Safety Of Others
(Original instructions) ENGLISH Vibration Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding The declared vibration emission values stated in the technical wheel may cut gas or water pipes, electrical wiring or data and the declaration of conformity have been measured objects that can cause kickback. - Page 8 ENGLISH (Original instructions) Features Place the disc (10) onto the spindle (4) as shown (fig. B). If the disc has a raised centre (11), make sure that the This tool includes some or all of the following features. raised centre faces the inner flange. 1.
- Page 9 (Original instructions) ENGLISH wheel breakage. Edge grinding wheels are not designed material removal. Move to a medium grit paper and finish with to withstand side pressures caused by bending. a fine grit disc for optimal finish. Remove the tool from the work surface before turning the Coarse = 16 - 30 grit.
- Page 10 ENGLISH (Original instructions) Mounting and using cutting (type 41) wheels All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding Cutting wheels include diamond wheels and abrasive discs. project. Vacuum filter bags should be changed Abrasive cutting wheels for metal and concrete use are frequently.
-
Page 11: Troubleshooting
(Original instructions) ENGLISH Once a cut is begun and a notch is established in the Connect the brown lead to the live terminal in the new workpiece, do not change the angle of the cut. Changing plug. the angle will cause the wheel to bend and may cause Connect the blue lead to the neutral terminal. -
Page 12: Protecting The Environment
ENGLISH (Original instructions) Sanding Flap Discs Wire Wheels Type 27 guard Type 27 guard Type 27 guard Type 27 guard Unthreaded backing flange 3 inch wire cup brush 4 inch wire cup brush Sanding Discs Hubbed sanding flap disc non-hubbed sanding flap disc Rubber backing pad Threaded clamp nut... -
Page 13: Technical Data
BEG120 Type 1 Input voltage Power input Rated speed 12000 12000 BEG110, BEG120, BEG210, BEG220 Angle grinder Black & Decker declares that these products described under Disc bore "technical data" are in compliance with: Max disc thickness 2006/42/EC, EN 60745-1:2009 + A11:2010;...