Panasonic AJ-PG50EJ Operating Instructions Manual page 108

I/F SETUP > NETWORK (Continued)
Item
NETWORK TOOLS
LOG DISPLAY Displays the connection log.
STATUS
Displays the network status.
DISPLAY
INITIALIZE Initializes various network settings to restore them to the factory defaults.
PING Checks the network connection.
DISPLAY
I/F SETUP > DISPLAY
Item
Set whether to output the thumbnail screen to HDMI OUT and SDI OUT.
GUI OUTPUT LCD: Not output (displayed only on LCD monitor)
ALL: Outputs to all of the LCD, HDMI OUT, and SDI OUT.
Set whether to output the superimposed display to HDMI OUT and SDI OUT.
OSD OUTPUT LCD: Does not output (displayed only on the LCD monitor).
ALL: Outputs to all of the LCD, HDMI OUT, and SDI OUT.
Sets superimposed display for the recording or playback screen.
OSD GRADE ALL: Displays all.
NO LVL METER: Does not display the audio level meter.
Sets the superimposed display items.
Here, data indicates the CTL/TC/UB value selected with the [COUNTER] button.
TIME: Data
T&STATUS: Data and operating status
T&S&M: Data, operating status, clip number, video format, audio bit rate
T&REC TIME: Data and REC TIME
T&REC DATE: Data and REC DATE
T&UB: Data and user bits
OSD TC SELECT
T&CTL: Data and CTL
T&T: Data and time code
Note:
When "T&S&M" is set, an error message appears in the superimposed display if a warning
or error occurs.
Selects waveform and vector monitor display.
WAVE: Waveform display
WFM TYPE
VECTOR: Vector display
OFF: Does not display.
Selects the display position for the waveform monitor.
R/T: Positioned at top right.
L/T: Positioned at top left.
R/B: Positioned at bottom right.
WFM POSI
L/B: Positioned at bottom left.
Note:
The display on the LCD monitor moves left or right only.
Sets whether to display the 4:3 marker on the LCD monitor.
4:3 MARKER ON: Displays.
OFF: Does not display.
Sets the vertical text position for superimposed display.
CHARA V POSI TOP: Display at the top of the screen.
BOTTOM: Display at the bottom of the screen.
108
Setup Menu: Menu List
Settings and brief function description
Settings and brief function description
However, when UB is selected with the [COUNTER] button, the time code is indicated
after the user bits.
However, when CTL is selected with the [COUNTER] button, the time code is indicated
after the CTL data.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz