Panasonic AJ-PG50EJ Operating Instructions Manual page 106

I/F SETUP > NETWORK (Continued)
Item
STREAMING SETTING
Sets the method for starting video streaming.
AJ-PG50: Starts/stops streaming from the unit.
START TRIGGER
RECEIVER: Operates the start/stop of the streaming distribution from the terminal on the
network using the P2 Browser or the P2 Streaming Receiver.
Sets the source from where settings for streaming is acquired when "AJ-PG50" is selected
in "START TRIGGER".
INTERNAL: Uses the settings set on the unit.
SETTING DATA
SD CARD: Uses the settings of the file inside the SD memory card inserted in the SD card slot.
When this item is set to "SD CARD", insert an SD memory card before turning on the power
of the unit.
Sets the IP address of the device receiving the streaming video when "AJ-PG50" is selected
SERVER ADDR.
in "START TRIGGER".
Sets the RTSP port number required for streaming when "AJ-PG50" is selected in "START
RTSP PORT TRIGGER".
Factory default setting: 554
When "AJ-PG50" is selected in "START TRIGGER" and "INTERNAL" is selected in "SETTING
LOAD
DATA", the connection information necessary for streaming distribution is read from the SD
(SD CARD)
memory card.
When "AJ-PG50" is selected in "START TRIGGER" and "INTERNAL" is selected in "SETTING
SAVE
DATA", the connection information necessary for streaming distribution is saved to the SD
(SD CARD)
memory card.
When "AJ-PG50" is selected in "START TRIGGER", the streaming distribution is started/
stopped from the unit.
STREAMING
START: Starts streaming.
STOP: Stops streaming.
LAN PROPERTY
MAC ADDRESS Displays the MAC address of the LAN connector of the unit. (This cannot be changed.)
Automatically sets the network settings by DHCP.
ENABLE: Uses DHCP (automatic assignment)
DISABLE: Enter the settings without using DHCP (automatic assignment).
When "DISABLE" is selected, the following menu items are displayed. Set the items.
IP ADDRESS: Sets the IP address.
DHCP
SUBNET MASK: Sets the subnet mask.
DEFAULT GATEWAY: Sets the default gateway address.
PRIMARY DNS: Sets the address of the primary DNS server.
SECONDARY DNS: Sets the address of the secondary DNS server.
DHCP SERVER: Sets whether to use the DHCP SERVER function when connecting via a
wired LAN.
WIRELESS PROPERTY
MAC ADDRESS Displays the MAC address of the wireless LAN of the unit. (This cannot be changed.)
Selects the connection method.
DIRECT: Enables direct access to the network functions of the unit from a smartphone, tab-
TYPE
let, or computer.
INFRA: Connects with a wireless access point.
Sets the SSID setting method.
SSID INPUT
SELECT: Select from an access point list.
MODE
MANUAL: Enter manually
SSID Displays the network name (SSID).
Switches between two transmission methods (2.4 GHz or 5 GHz).
BAND
2.4GHz
5GHz
106
Setup Menu: Menu List
Settings and brief function description FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz