D-Link DW-120XX User Manual page 9

Infrastructure Mode
In Infrastructure Mode the use of an Access Point is necessary in order for the wireless
clients to communicate with each other.
Figure 3-4. Operating Mode Dialog
When selecting the Infrastructure mode you need to specify the ESSID (Figure 3-5).
• ESSID: Select the ESSID of the access point to which the wireless station will be
associated with in infrastructure mode.
Figure 3-5. ESSID Dialog
A soon as you have set your selections, press the "Next" button and a window appears
with a review of your installation settings. Please make sure that these values are the
desired ones. In case you have made a mistake, you can always select the "Back" button
to make a correction. Press the "Next" button to continue with the installation, and finally
press the "Finish" button for the installation to be completed.
Notes: 1. You can now safely plug your USB (A) card. The "Add New Hardware Wizard"
automatically loads the Drivers for your USB (A) card. As soon as the
procedure has been completed.