How To Uninstall The Configuration & Monitor Utility; Firmware Upgrade Utility - D-Link DW-120XX User Manual

4.3 How to Uninstall
the
Configuration &
Monitor Utility
In order to uninstall the Configuration & Monitor Utility, you must select the "Unistall
Configuration & Monitor Utility" option (Start -> Programs -> Atmel 802.11 Wireless LAN
-> Unistall Configuration & Monitor Utility). It is recommended to "Exit" the Configuration
& Monitor Utility prior to starting the unistallation procedure. Finally a window will appear
prompting you to reboot and you must select YES.
Section 5

Firmware Upgrade Utility

For the Fast-VNET USB (A) cards, ATMEL offers a firmware utility which is a Windows
application (Firmware Upgrade utility) that allows you to upgrade the firmware of your
card while your card is running.
5.1 Firmware
Upgrade Utility
Note: Please DO NOT use this utility unless you have got new binary files from
ATMEL. If you use this utility and you do not supply the correct binary file, you
may damage your card.
The Firmware Upgrade utility allows you to upgrade the firmware of your card while your
card is running. It will download the new firmware and it will reset your card in order to
start operating with the new firmware.
ATMEL offers the Firmware Upgrade Utility for Windows 98, Windows Me, Windows
2000.
The Firmware Upgrade Utility is automatically installed when you run the program
"setup.exe" of you installation CD (see Section 4- "How to install the Configuration &
Monitor Utility"). Locate the program from the Start Menu -> Programs -> ATMEL
802.11Wireless LAN -> Firmware Upgrade Utility. When you open the program, you will
see the main screen of Figure 5-1.
Figure 5-1. The ATMEL PCMCIA Firmware Upgrade Utility