Turbo Mode - Honeywell 1900GSR-2 Quick Start Manual

Turbo Mode

This selection is a keyboard modifier, so it may only be used when
your interface is USB Keyboard or Keyboard Wedge. The scanner
sends characters to a terminal faster using Turbo Mode. If the termi-
nal drops characters, do not use Turbo Mode.
Turbo Mode On
Turbo Mode Off
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or Presen-
tation mode (the scanner is activated when it "sees" a bar code).
Manual Trigger - Normal
(Default)
Presentation Mode