Makita HU01Z Instruction Manual page 14

For installing the grass shear blade, refer to the section
below titled "Installing or removing grass shear blades".
Grass shear blade assembly (for Grass Shear)
•
2-way change set consisting of the following three
•
accessories
1
1. Grass shear blade
2. Grass shear blade cover
3. Storage case
4. Base frame
011042
Long handle attachment (for Grass Shear)
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before carrying out
any work on the tool.
Installing or removing blade cover
CAUTION:
Be careful not to contact the shear blade when
•
installing or removing the blade cover. Contacting
the shear blade may cause personal injuries.
1
010869
2
1. Shear blades
2. Base frame
3. Blade cover
2
3
Grass shear blade cover (for Grass Shear)
•
Storage case (for blade bottom section)
•
Base frame (for Grass Shear)
•
3
010870
Slide the blade cover from the tool's side until the shear
blade completely hides itself and then push in it lightly
towards the tool from the front.
To remove the blade cover, take the above installation
procedure in reverse.
Installing or removing grass shear blades
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before installing or
removing shear blades. Failure to switch off and
remove the battery cartridge from the tool may
result in serious injury from accidental start-up.
When replacing the shear blade, always wear
•
gloves without removing blade cover so that hands
and face does not directly contact the blade.
Failure to do so may cause personal injury.
NOTE:
Do not wipe off grease from the gear and crank.
•
Failure to do so may cause damage to the tool.
14
4