Removing The Stand (For Attaching The Bracket Wall) - Samsung CRG90 Series User Manual

Removing the Stand (For Attaching the BRACKET WALL)

― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
Rotate the COVER-REAR TOP counterclockwise.
Unfasten the 4 screws at the top of the stand neck.
Lift the COVER-REAR TOP.
6
Lift and remove the stand.
Disassemble the COVER-REAR TOP.
Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
Remove the stand base from the stand neck.
17