Removing The Stand (For Attaching The Bracket Wall) (S27Hg50Qq* Model Only) - Samsung S25HG50 User Manual

Removing the Stand (For Attaching the BRACKET WALL) (S27HG50QQ* model only)

― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
1
Place the screen on the Styrofoam or soft cushion
included in the package, hold the stand base with
one hand and remove the screws of the stand base
with another hand.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
5
Remove the Cover-Stand Pivot Rear after detaching
it from the rear cover.
2
Loosen the screws at the bottom of the stand base.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
6
Remove the 4 screws connecting the stand neck
with the device and then lift and remove the stand
neck.
3
Place the device flat after removing the stand base.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
7
Lift and remove the stand.
4
Turn the Cover-Stand Pivot Rear counterclockwise
and then pull it upward to detach it from the rear
cover.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
20