Upgrading The Software Via Usb - Samsung CRG90 Series User Manual

Upgrading the Software via USB

1
Be sure to insert the USB disk into the
either the monitor screen operates normally or the check signal is displayed on the monitor screen.
HDMI IN DP IN 1 DP IN 2
When the screen as shown in the following figure is displayed, press and hold the Down arrow key for
5 seconds.
Power Off
port. You can upgrade the software via USB only if
(PC IN)
Check the cable connection and the settings of the source device.
DisplayPort1
2
When the message as shown in the following figure is displayed on the monitor, select
upgrade the software.
Do you want to update via USB?
Yes
3
When the screen as shown in the following figure is displayed, select Yes.
Update now
Update from version XXXX.X to version XXXX.X?
Yes
4
The software upgrading proceeds.
Update now
Updating product Software...
Your product will turn itself off and on again automatically after completing
update.
No
No
5%
Yes to
14