Fitting The Carbon Filter - Baumatic BRT60SS User Manual

o IMPORTANT: Defective bulbs should be replaced immediately.
o If the light still does not work, make sure that the internal plug is fitted properly
before you call for technical assistance.
o Refit the grease filter.

Fitting the carbon filter

Part number CF260 / SQ1
If the appliance is going to be used in recirculation mode then it is necessary to fit a
carbon filter. This will help to absorb unpleasant odours caused by cooking.
IMPORTANT: Before attempting to fit or remove the carbon filters, you must ensure the
rangehood is switched off first.
To remove, or install, the charcoal filter (CF260/SQ1) in the direction shown below.
CF260
1) Remove the grease filters (as described previously).
2) Insert the carbon filter in the rectangular hole, fitting it over the motor.
10
SQ1