Table of Contents
Advertisement
Basic Operations
When recording or shooting in 2D mode, only the right lens is used for capturing image.
This product utilizes the "Parallax Barrier" 3D technology. The parallax barrier is a
special layer placed in front of the LCD screen. In 3D mode, it allows each of your eye
to see a different set of pixels on the screen (hence the 3D effect), and as a result the
brightness of the screen will also seem to be halved in 3D mode.
Recording a video clip
1
Press the Record button (
2
During recording, you can move the Joystick up/down
(
) to zoom in/out the image. You can also press the
OK button (
3
Press the Record button (
recording.
When recording in a dim environment, please use extra light source to illuminate the
subject.
Taking a photo
1
Move the Joystick up/down (
image until a proper scene is set.
2
Press the Shutter button (
Blurred photos may occur due to hand shake. To avoid blurred photos, please hold the
camcorder steady when taking photos or use a tripod to eliminate shaking.
ViewSonic
Press this button to shift between 2D/3D mode. Pressing this
button in preview will determine whether the recorded file is
2D or 3D. Pressing this button in playback will let you see the
2D or 3D files stored in your camcorder or memory card. Note
that 3D files cannot be recorded/viewed/deleted in 2D mode,
and vice versa.
) to start the recording.
) to pause or resume the recording.
) again to stop the
) to zoom in/out the
) to take a photo.
4
1
3
2
1
2
3DV5
Advertisement
Table of Contents
