Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Page 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Page 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Lead (Pb)
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic. com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.
Inserting an SD card ... 15 Inserting the battery... 16 Charging the battery ... 18 Turning on/ off the camcorder ... 18 Connecting to TV (AV Cable)... 19 Connecting to TV (HDMI Cable) ... 19 Connecting to PC (USB Cable) ... 20 Changing modes ...
Page 7
2.9.6 Auto Power Off ... 24 2.9.7 Frequency... 24 2.9.8 TV Standard... 25 2.9.9 Beep ... 25 Using the Camcorder ... 26 Recording Videos... 26 Video Mode Menu... 29 3.2.1 White Balance ... 30 3.2.2 Resolution... 30 3.2.3 Effect ... 31 3.2.4...
NVIDIA GeForce 8, 9 and 200 series • 3D ready monitor (120Hz) • 3D vision kits 1.2 Features The camcorder offers a variety of features and functions including: • 3D and 2D video/image shooting and playback • 3.2” LCD 3D display •...
1.3 Unpacking the camcorder The following items should be present in the package. If any item is missing or appears damaged, contact your dealer immediately. Camcorder Quick Start Guide CD Rom Li-ion Battery Charger Power Cable Pouch USB AV Cable...
1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls of this camcorder. 1.4.1 Front view Lens Lens Lens Head LED Light...
1.4.6 Right view Microphone LCD Panel Menu Button Playback Button 3D Button Power Button SD Card Compartment...
Page 15
Button 3D Button Zoom Button Shutter Button Function Press to turn the camcorder on or off. Press to display the menu. Press again to go back the previous screen or close the menu. Press to playback recorded videos or photos.
Page 16
Name Button Mode Dial Record Button Navigation Button Function Adjust to switch to different modes: Video, Camera, or Setup. • In Video mode, press to start or stop recording a video. • In Video Playback mode, press to start and pause video playback.
Page 17
Name Button Function • Press the left/right button to scroll through the videos. • While playing video, press the left/right button to rewind/fast-forward video playback. • While playing video, press and hold the left/right button increase/decrease to toggle the rewind/ fast-forward speed (2X, 4X, or 8X).
1.4.7 Operating the camcorder To turn on the power, open the LCD panel or press the Power Button for one second. Rotate the LCD panel so you can view pictures and movies.
Page 19
Rotate the lens head to open the lens. 90°...
2 Getting started Read this section to learn how to start using the camcorder. This section covers basic functions such as switching on, inserting the battery and memory cards, and configuring preliminary settings. See later chapters for advanced functions. 2.1 Inserting an SD card An SD card can be installed in the camcorder to provide additional storage space for still images, video clips, or other files.
Close the SD card door. 2.2 Inserting the battery This camcorder is designed to use a rechargeable Li-ion battery. Only use the batteries supplied by the manufacturer or your dealer. Note: Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder.
Page 22
Insert the battery. Make sure that the + and – symbols on the battery line up with the + and – symbols on your camcorder. Close the battery cover. Note: Make sure that the battery cover is tightly closed to ensure...
Approximate charging time is 240 minutes with a charger and a USB connection. 2.4 Turning on/ off the camcorder Press and hold the Power Button to turn the camcorder on/off. Note: Closing and opening the LCD panel can power on/off the camera.
2.5 Connecting to TV (AV Cable) To view pictures or videos on a TV, connect the camcorder to a TV using the supplied AV cable as shown. 2.6 Connecting to TV (HDMI Cable) You can also connect the camcorder to a TV using the HDMI cable.
2.7 Connecting to PC (USB Cable) Connect the camcorder to a computer with the USB cable provided as shown. 2.8 Changing modes The camcorder can operate in three modes: , Camera, and Video Setup. Adjust the Mode Dial to switch between modes.
2.9.1 Managing the Setup mode To select a menu in the Setup mode, do the following: Adjust the Mode Dial to Setup mode to display the Setup mode screen. Use the Navigation Button to scroll through the options/pages until the desired menu is highlighted. Please see below for the available options.
2.9.2 Language The Language menu allows you to select the language displayed. To select the language, do the following: Use the left/right Navigation Button to select the desired language. Press the middle Navigation Button to confirm. 2.9.3 Date / Time The Date / Time menu allows you to adjust the date and time.
Navigation Button to confirm. Warning: Formatting will delete everything on the media. 2.9.5 Default The Default menu allows you to reset the camcorder to factory defaults. To reset the camcorder, do the following: Use the left/right Navigation Button to select √.
2.9.6 Auto Power Off The Auto Power Off menu allows you to set an idle time after which the camcorder automatically sets to sleep mode to save power. To adjust the Auto Power Off, do the following: Use the left/right...
2.9.8 TV Standard The TV Standard menu allows you to select the TV standard of the recorded videos. To adjust the TV Standard, do the following: Use the left/right Navigation Button to select NTSC or PAL. Press the middle Navigation Button to confirm.
3 Using the Camcorder 3.1 Recording Videos To record a movie, do the following: Rotate the lens head and flip open the LCD panel to turn on the camcorder. Adjust the Mode Dial to Video mode. To adjust the video, you may: ...
Page 32
The Video Recording Screen Icon Description Indicates that the camcorder is in Video mode. Indicates the amount of zoom being used. Indicates the current White Balance mode. Indicates that night mode is enabled.
Page 33
Icon Description Indicates the amount of battery power left. Indicates the current resolution. Indicates the current exposure value. Indicates the memory card is inserted. Indicates that the internal memory is used to store files. Indicates the remaining space for your memory card/internal memory.
3.2 Video Mode Menu To select a menu in the Video mode, do the following: Press the Menu Button to open the Video mode menu screen. Use the Navigation Button to scroll through the options until the desired menu is highlighted. Please see below for the available options.
To set the White Balance, please do the following: Use the left/right Navigation Button to select the desired option: Auto: Select this option to let the camcorder set the white balance automatically. Sunny: Select this option for daylight filming.
To select the resolution, do the following: Use the left/right Navigation Button to select the desired option: 1080P: Select this option for 1920 x 1080 resolution. 720P30: Select this option for 1280 x 720 resolution at 30 fps. 720P60: Select this ...
3.2.4 Night Mode The Night Mode menu allows you to enable or disable the night mode feature. To set night mode, do the following: Use the left/right Navigation Button to select: X: Turn night mode off. √: Turn night mode Press the middle Navigation Button to confirm.
3.3 Playback Videos 3.3.1 Playback Videos To playback videos, do the following: Make sure you are in Video mode. Adjust the Mode Dial to switch to Video mode if not. Press the Playback Button to open the Video playback screen. Press the left/right Navigation Button to browse the recorded videos.
Page 39
The Video Playback Screen Icon Description Indicates that the camcorder is in Playback mode. Indicates the video file number. Indicates the total recorded time. Indicates that the file is protected. Indicates the video resolution.
3.4 Deleting Videos To delete a single video, do the following: In Video mode, press the Playback Button to enter the Video Playback mode. Press the left /right Navigation Button to select the video you want to delete. Press the Menu Button to open the Video Playback menu screen.
Note: • Once deleted, files cannot be recovered. Ensure the files are transferred to the computer or saved to another storage device. • Files that have been protected will not be deleted. You have to unlock the files first before deleting them. 3.5 Protecting Videos To protect a video from being deleted, do the following: In Video mode, press the Playback Button to enter the Video...
3.6 Autoplay Videos The Autoplay function allows you to play each video clip in turn. To start autoplay, do the following: In Video mode, press the Playback Button to enter the Video Playback mode. Press the Menu Button to open the Video Playback menu screen.
3.7 Video Output The Video Output function allows you to change the display output in 3D format on a 3D TV. To set video output, do the following: In Video mode, press the Playback Button to enter the Video Playback mode. Press the Menu Button to open the Video Playback menu screen.
3.8 Shooting Photos To shoot a photo, do the following: Rotate the lens head and flip open the LCD panel to turn on the camcorder. Adjust the Mode Dial to switch to Camera mode. Press the Shutter Button to capture a photo.
Page 45
The Camera Screen Icon Description Indicates that the camcorder is in Camera mode. Indicates the amount of zoom being used. Indicates the total number of pictures. Indicates the current White Balance mode. Indicates that night mode is enabled. Indicates the amount of battery power left.
3.9 Camera Mode Menu To select a menu in the Camera mode, do the following: Press the middle Navigation Button to open the Camera mode menu screen. Use the Navigation Button to scroll through the options until the desired menu is highlighted. Please see below for the available options.
To set the White Balance, do the following: Use the left/right Navigation Button to select the desired option: Auto: Select this option to let the camcorder set the white balance automatically. Sunny: Select this option for daylight filming.
To select the resolution, do the following: Use the left/right Navigation Button to select the desired option: (2D mode) 2M: Select this option for 1832 x 1372 resolution. 5M: Select this option for 2592 x 1944 resolution. 8M: Select this option for 3200 x 2400 resolution.
3.9.4 Night Mode The Night Mode menu allows you to enable or disable the night mode feature. To set night mode, do the following: Use the left/right Navigation Button to select: X: Turn night mode off. √: Turn night mode Press the middle Navigation Button to confirm.
3.10 Playback Photos 3.10.1 Playback Photos To playback photos, please do the following: Make sure you are in the Camera mode. Adjust the Mode Dial to switch to Camera mode if not. Press the Playback Button to enter the Photo playback screen.
Page 51
The Photo Playback Screen Icon Description Indicates that the camcorder is in Camera Playback mode. Indicates the file number of the current photo. Indicates the sequence number of the current photo over the total number of photos. Indicates the amount of battery power left.
3.11 Deleting Photos To delete a single photo, do the following: In Camera mode, press the Playback Button to enter the Photo Playback mode. Press the left /right Navigation Button to select the photo you want to delete. Press the Menu Button to open the Photo Playback menu screen.
Note: • Once deleted, files cannot be recovered. Ensure the files are transferred to the computer or saved to another storage device. • Files that have been protected will not be deleted. You have to unlock the files first before deleting them. 3.12 Protecting Photos To protect a photo from being deleted, do the following: In Camera mode, press the Playback Button to enter the...
3.13 Autoplay Photos The Autoplay function allows you to play the slideshow of the photos on your camera. To start autoplay, do the following: In Camera mode, press the Playback Button to enter the Camera Playback mode. Press the Menu Button to open the Camera Playback menu screen.
3.14 Image Output The Image Output function allows you to change the display output in 3D format on a 3D TV. To set image output, do the following: In Camera mode, press the Playback Button to enter the Camera Playback mode. Press the Menu Button to open the Camera Playback menu screen.
Appendix Specification General Imaging sensor 1/3.2” 5M CMOS Sensor x 2 5.0 Megapixel Active pixels Internal: Built-in 128MB Flash Memory Storage media (Available memory for image storage is approximately 56MB) SD Card: (Up to SDHC 32GB Class6) Sensitivity Auto Exposure mode Programmed AE Color effects Natural/B&W/Sepia Lens...
Page 57
General Movie clips H.264 (MP4) 3D and 2D Movie: WVGA 848x480 60fps, 3D: 8X Zoom 2D: 10X LCD monitor 3.2”color LCD monitor (320x480 pixels) LED light Effective range: < 1M Mode: On/Off White balance Auto/Sunny/Cloudy/Tungsten/ Fluorescent -2.0 EV~+2.0 EV compensation Interface AV-out: NTSC / PAL / HDMI MSDC: USB 2.0 (high speed)
The batteries have no power. The camcorder The auto power off suddenly turns off. function is enabled. The camcorder is running out of battery power. The captured Before the image is image is not saved the power stored in has been cut off.
Page 59
SDHC Logo is a trademark of SD-3C, LLC. Solution Adjust the EV setting on the camcorder. Unlock the memory card. Format the memory card. Before formatting the card, ensure you back up the files.
(Mexico) Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America www.viewsonic.com/la/ (Peru) Macau www.hk.viewsonic.com...
Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic 3D Full HD Camcorder are warranted for 1 year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 62
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon...
Page 63
Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic 3D Full HD Camcorder are warranted for 1 year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 64
E-Mail: rrrb@sureste.com Tijuana: Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico 4.3: ViewSonic Mexico Limited Warranty Villahermosa: Compumantenimietnos Garantizados, S.A. de C.V. AV. GREGORIO MENDEZ #1504 COL, FLORIDA C.P. 86040 Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09 E-Mail: compumantenimientos@prodigy.net.mx...