Table of Contents
Advertisement
ACTIVATION CHART
Display Reads:
Language
-
English
+
Display Reads:
Activate me (ENT) or
ESC to run in manual
Display Reads:
To Activate go to
www.activategen.com
Display Reads:
Serial 123456789
Passcode XXXXX +/-
Display Reads:
Select Hour (0-23)
- 6 +
Figure 7.2 – Activation Sequence
26
Use ARROW keys to scroll to desired
language. Press ENTER to select.
Press ENTER to begin the activation process.
If you do not have your activation code,
go to www.activategen.com or call
1-888-9ACTIVATE (922-8482 , US & CA only).
If you already have your activation code, wait
3-5 seconds for the next display.
Use ARROW keys to scroll and fi nd the fi rst
number of your Activation Code.
Press ENTER to select.
Repeat this step until all digits have been
entered.
Use ESCAPE to correct previous digits.
Activation is complete when all digits are
entered above and your screen shows this
display.
Follow the controller prompts to continue
setting the time function. Refer to your Owner's
Manual with questions.
TROUBLESHOOTING
If the wrong language is chosen, it can be
changed later using the "edit" menu.
If ESCAPE is pressed instead of ENTER,
the generator will only run in manual mode
(for test purposes) and NOT ACTIVATED will
be displayed. You will need to remove the
7.5 Amp generator control panel fuse AND
disconnect the T1, N1 and N2 connector in
the external connection box (if equipped); or
disconnect utility input (main breaker) to the
transfer switch for 3-5 seconds and reconnect,
then begin with Step 1.
What happens if "Wrong Passcode Try Again"
appears?
Reenter the activation code. If a second
attempt is unsuccessful, check the number
against the code given on activategen.com. If
it is correct and the generator will not accept it,
contact 1-888-9ACTIVATE (922-8482 , US &
CA only).
Advertisement
Table of Contents
