Download Print this page

Operate The Headset; Led And Sound Indication - Philips SHB6000/28 Quick Start Manual

Bluetooth stereo headset
Hide thumbs Also See for SHB6000/28:

Advertisement

Operate the headset

Turn headset on/off
Play / Pause music
Stop music
Next / Previous track
Adjust volume
Pick up / End a call
Reject a call
Redial the last number
Activate voice dialing*
Mute/Unmute the Mic
Transfer a call to a mobile phone
*Available if supported by your mobile phone.

LED and sound indication

The red/blue LED flashes alternately.
The blue LED flashes once every 6
seconds.
The blue LED flashes twice every 3
seconds.
The blue LED flashes once every half a
second.
The blue LED flashes once every second.
The red LED flashes three times and
beeps twice every minute.
Solid red LED.
The LED is off.
The headset beeps every 5 seconds.
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V1.0
Hold
until LED turns on/off.
Tap
Hold
Tap
/
Press VOL +/VOL -
Tap
Hold
Press
twice quickly.
Hold
until beep occurs.
Double tap
during a call.
Hold
during a call.
The headset is ready for pairing.
The headset is connected to the device.
The headset is not connected.
There is an incoming/outgoing call.
The headset is active on a call.
The battery is low in power.
The headset is charging.
The headset is off./Charging is finished.
The Mic is muted.

Advertisement

loading

This manual is also suitable for:

Shb6000/00Shb6000