Table of Contents
Advertisement
Web Access
HTTP
HTTP Port
HTTP to HTTPS
Redirect
HTTPS
HTTPS Port
From Wireless
Access Control
SNMP Settings
SNMP
Contact
Location
HTTP (Hyper Text Transfer Protocol) is the standard for
transferring files (text, graphic images and other
multimedia files) on the World Wide Web.
Enable to allow Web access by HTTP protocol.
Specify the port for HTTP. It can be 80 (default) or from
1024 to 65535.
Enable to redirect Web access of HTTP to HTTPS
automatically.
This field is available only when HTTP access is disabled.
HTTPS (Hypertext Transfer Protocol Secure) can provide
more secure communication with the SSL/TLS protocol,
which support data encryption to HTTP clients and
servers.
Enable to allow Web access by HTTPS protocol.
Specify the port for HTTPS. It can be 443 (default) or
from 1024 to 65535.
Enable wireless devices to connect to access point's
admin page. Disabled by default.
By default, no IP addresses are prohibited from
accessing the device's admin page. You can enable
access control and enter specified IP addresses for
access. Four IPv4 and four IPv6 addresses can be
specified.
Simple Network Management Protocol (SNMP) is a
network monitoring and management protocol.
Enable or disable SNMP function here. Disabled by
default.
Enter contact information for the access point.
The contact includes 1 to 32 characters. Special
characters are allowed.
Enter the area or location where the access point
resides.
The location includes 1 to 32 characters. Special
characters are allowed.
38
Advertisement
Table of Contents
