Using 802.1X Mode (Without Wpa) - Linksys LAPAC1200C User Manual

3. Select and enter the correct values, as advised by your Network Administrator.
For example, to use EAP-TLS, you would enable Data encryption, and click the checkbox
for the setting The key is provided for me automatically, as shown below.
4. Setup for Windows XP and 802.1x client is now complete.

Using 802.1x Mode (without WPA)

This is very similar to using WPA-Enterprise.
The only difference is that on your client, you must NOT enable the setting The key is provided for
me automatically.
135