Table of Contents
Advertisement
Internet Authentication Service (RADIUS) Setup
1. Select Start > Programs > Administrative Tools > Internet Authentication Service.
2. Right-click on Clients and select New Client.
3. Enter a name for the access point, click Next.
4. Enter the address or name of the wireless access point, and set the shared secret, as
entered on the Security Settings of the wireless access point.
5. Click Finish.
6. Right-click on
7. Assuming you are using EAP-TLS, name the policy "eap-tls", and click Next.
8. Click Add...
If you don't want to set any restrictions and a condition is required, select
Restrictions
, and click Add...
Remote Access Policies
New Remote Access Policy
, select
.
Day-And-Time-
127
Advertisement
Table of Contents
