Table of Contents
Advertisement
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
There is no spark when you
try to activate the spark gen-
erator.
There is no spark when you
try to activate the spark gen-
erator.
There is no spark when you
try to activate the spark gen-
erator.
The flame extinguishes im-
mediately after ignition.
The flame ring is uneven.
The burners do not work.
The appliance makes noises.
The flame colour is orange
or yellow.
The lamp does not operate.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated
up sufficiently.
Burner crown is blocked with
food residues.
There is no gas supply.
The lamp is defective.
ENGLISH
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec-
tion diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Place the burner cap and
crown correctly.
After lightning the flame,
keep the spark generator ac-
tivated for equal or less than
10 seconds
Make sure that the injector is
not blocked and the burner
crown is clean.
Check the gas connection.
Some metal parts of the ap-
pliance expand and contract
when they heat up or cool
down. The noises are nor-
mal.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
Replace the lamp.
23
Advertisement
Table of Contents
