Table of Contents
Advertisement
16
www.aeg.com
10.3 Using the turnspit
WARNING!
Be careful when you use the
turnspit. The forks and the
spit are sharp. There is a risk
of injury.
WARNING!
Use oven gloves when you
remove the turnspit. The
turnspit and the grill are hot.
There is a risk of burns.
CAUTION!
The maximum weight
permitted on the turnspit is
4.5 kg.
A
A. Support hook
B. Forks
C. Spit
D. Handle
The support hook is installed
in the top of the oven cavity.
You can leave the support
hook in the oven, when the
turnspit is not active.
1. Open the oven door.
2. Put the turnspit handle into the spit.
3. Put the baking tray on the lowest
shelf level.
4. Snap out one end of the support
hook from the oven ceiling A and let
it hang on the other end.
B
C
D
A
5. Install the first fork on the spit, then
put the meat on the turnspit and
install the second fork.
Make sure that the meat is in the
middle of the spit.
6. Use the screws to tighten the forks.
7. Put the tip of the spit into the
turnspit hole.
Refer to "Product description"
chapter.
8. Put the front part of the spit on the
support hook.
9. Remove the turnspit handle.
10. Light the grill.
Refer to "Oven - Daily use" chapter.
11. Press the turnspit button
12. Make sure that turnspit rotates.
13. Close the oven door.
The turnspit does not stop if you
open the oven door.
When meat is ready press the turnspit
button. Turn off the grill. Install the
turnspit handle. Carefully remove the
turnspit and the roasting pan from the
oven.
.
Advertisement
Table of Contents
