17. Install the
WLAN
card.
18. Install the
RF switch
board.
19. Install the
base
cover.
20. Install the keyboard.
21. Install the
primary M.2 2280 solid state drive
22. Install the battery.
23. Follow the procedure in
Palmrest assembly
Removing the palmrest assembly
Prerequisites
● Follow the procedure in
● Remove the battery.
● Remove the
primary M.2 2280 solid state drive
● Remove the keyboard.
● Remove the
base
cover.
● Remove the
RF switch
● Remove the
WLAN
card.
● Remove the
WWAN
card.
● Remove the
dock I/O
● Remove the
rear I/O
board.
● Remove the
express card
● Remove the
inner
frame.
● Remove the
GPS
board.
● Remove the
smart card
● Remove the
smart card reader I/O
● Remove the fan.
● Remove the
heat-sink (UMA)
● Remove the
system
board.
● Remove the
display
assembly.
● Remove the
power button board with finger print
About this task
The following images indicate the location of the palmrest assembly and provide a visual representation of the removal
procedure.
or
after working inside your
before working inside your
board.
board.
reader.
reader.
board.
primary M.2 2230 solid state
computer.
computer.
or
primary M.2 2230 solid state
reader.
drive.
drive.
Removing and installing components
101