Table of Contents
Advertisement
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
memory
6. Remove the
WLAN
7. Remove the
SSD
8. Remove the
speakers
9. Remove the
coin-cell battery
10. Remove the
hard drive assembly
11. Remove the
system fan
12. Remove the
heatsink
13. Remove the
IO board
14. Remove the
touchpad
15. Remove the
display assembly
16. Remove the
power button board
17. Remove the
power button
18. Remove the
display hinges
19. Remove the
power adapter port
20. Remove the
system board
About this task
After performing the preceding steps, you are left with the palmrest and keyboard assembly.
NOTE:
The system board can be removed and installed together with the heatsink still attached.
before working inside your computer
Removing and installing components
79
Advertisement
Table of Contents
