Palmrest Assembly; Removing The Palmrest Assembly; Installing The Palmrest Assembly - Dell P133G Service Manual

Palmrest assembly

Removing the palmrest assembly

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the SIM card
4. Remove the base cover.
5. Remove the solid-state
6. Remove the WWAN card.
7. Remove the battery.
8. Remove the heatsink
9. Remove the display assembly.
10. Remove the speaker.
11. Remove the smart card
12. Remove the audio board.
13. Remove the system board.
14. Remove the I/O board.
15. Remove the power button with finger print
16. Remove the keyboard.
Steps
After performing the pre-requisite steps, you are left with the palmrest assembly.

Installing the palmrest assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the palmrest assembly and provides a visual representation of the installation
procedure.
58 Removing and installing components
before working inside your
card.
drive.
assembly.
reader.
reader.
computer.