Attaching Photocoupler Cable To The Control Pc Unit - Canon CXDI-31 Service Manual

4.1.5. Attaching photocoupler cable to the control PC unit

(1) Prepare the following parts (see Fig. 1):
A
(Fig. 1)
(2) Remove nut 1 from photocoupler cable clamp. Put part B on side of nut 1 and tighten nut 1.
(Fig. 2)
Part B must be put so that the claw on part B is facing toward nut 1. (Fig. 3)
Cable clamp
Nut 1
B
(Fig. 2)
(3) Attach part A to part B with two screws C.
2. Installation Manual
C
B
A: Photocoupler cable holding plate 1
B: Photocoupler cable holding plate 2
C: Screw (XB1-2300-506) x 4
Nut 2
Claw must be facing
nut 1.
B
(Fig. 4)
- - 16
(Fig. 3)
A
C x 2