Canon CXDI-31 Service Manual page 164

(3) Power cable fixing method
1) Remove the yellow tapes from the power cables.
2) Apply the tape to the position indicated 1 to 3 below in order. Before applying the tape,
straighten the cable so that there is no slack. Do not pull on the cables at this time. When
applying the tape, press the tape surface with a cotton swab or so to apply it firmly. (Do
not use a tool with a thin tip such as metal tweezers to avoid making damage on the
cable).
1
Common to 2, 3 and 5
3. CXDI-31 Imaging Unit
2
3
Criteria of Tape
Application
- 8 -
Recommended tape size (unit: mm)
Fit in to the bottom edge of the cover.
(Press the tape firmly to the edge using a
cotton swab or so.)
(12)
14 to 18
Tape should cover the
inner wall of the rim.