Maintenance - GoPro HERO10 Black Bones User Manual

Mounting Your GoPro
WaRNING: To avoid injury, do not use a tether when mounting
your camera on a helmet. Do not mount the camera directly
on skis or snowboards.
WaRNING: always use a helmet that meets applicable safety
standards if you're using a GoPro helmet mount or strap.
Choose the right helmet for your sport or activity, and make
sure that it's the right size and fit for you. Check to see that
your helmet's in good condition, and always follow the
manufacturer's instructions on safe use.
Replace any helmet that's been subjected to a major impact.
No helmet can protect against injury in every accident.
Be safe.
48
WaRNING: HERO10 Black Bones is not
waterproof or water resistant. Do not
use your camera in any situation where
it could get submerged or exposed to
rain or snow.

Maintenance

Follow these tips to get the best performance from your camera:
• For the best audio performance, shake your camera or blow on
the mic to remove debris from the microphone holes. Do not use
compressed air to blow into the mic holes.
• The lens cover is made from extremely tough strengthened glass,
but it can still be scratched or cracked. Keep it clean with a soft,
lint-free cloth.
• If debris gets stuck between the lens and trim ring, wipe with a dry
cloth or blow to remove debris. Do not insert foreign objects around
the lens.
WaRNING: Do not drop, disassemble, open, crush, bend,
deform, puncture, shred, microwave, incinerate, or paint your
camera. Do not insert foreign objects into any opening on
the camera. Do not use your camera if it's been damaged—
for example, if cracked, punctured, or harmed by water.
49