Maintenance - GoPro HERO7 black Manual

Hide thumbs Also See for HERO7 black:
Table of Contents

Advertisement

Removing the Side Door
REATTACHING THE SIDE DOOR
1. Hold down the Latch Release button and extend the tab on the door.
2. Press the tab onto the small silver bar.
82

Maintenance

Follow these tips to get the best performance from your camera:
• Your GoPro is waterproof to 10 m – no housing needed. Ensure
the door is closed before using it in or around water, dirt or sand.
• Before closing the door, ensure the seal is free of debris. Use a cloth
to clean the seal if needed.
• Make sure your GoPro is dry and clean before opening the door.
Rinse your camera with fresh water and dry it with a cloth if needed.
• If sand or debris hardens around the door, soak your camera in
warm tap water for 15 minutes and then rinse thoroughly to remove
the debris before opening the doors.
• For the best audio performance, shake your camera or blow on the
mic to remove water and debris from the microphone holes. Do not
use compressed air to blow into the mic holes. This could damage
the internal waterproof membranes.
• After every use in salt water, rinse your camera with fresh water
and dry it with a soft cloth.
• The lens cover is made from extremely tough strengthened glass,
but it can still be scratched or cracked. Keep it clean with a soft,
lint-free cloth.
• If debris gets stuck between the lens and trim ring, flush it out with
water or air. Do not insert foreign objects around the lens.
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hero 7 black

Table of Contents